Owner's Manual

ENGLISH
37
Part list for
installation
(A) Faceplate
(C) Mounting sleeve
(B) Trim plate
(D) Wiring harness
(E) Extraction key
(F) Screws (supplied for
/
)
Wiring connection
Fuse (10A)
Output terminals
Antenna terminal
Car fuse box
Car fuse box
Battery
Ignition
switch
Blue/White
(Power control wire/
Antenna control wire)
(12 V
350 mA)
Light blue/yellow
(Steering remote control
wire)
Black (Ground wire)
To the metallic body or chassis of the car
To the power control terminal
when using the optional power
amplifier or to the antenna
control terminal in the vehicle
Brown
(Mute control wire)
White
Gray
Green
Purple
White/Black
Gray/Black
Green/Black
Purple/Black
To connect the Kenwood
navigation system, refer your
navigation manual
To front speaker (left)
To rear speaker (left)
To front speaker (right)
To rear speaker (right)
If no connections are made, do not let the wire come out from the tab.
When connecting to an external amplifier, connect its ground wire
to the car’s chassis to avoid damaging the unit.
IMPORTANT : We recommend installing the unit with a commercially
available custom wiring harness specific for your car and leave this job
to professionals for your safety. Consult your car audio dealer.
INSTALLATION/CONNECTION
MIC (Microphone input
terminal)
( 17)
Expansion port (12 V 500mA)
To the optional SiriusXM Vehicle Tuner
(commercially available)
( 14)
To the steering wheel remote
control adapter
(For
)
To Kenwood Marine Remote Control unit,
KCA-RC55MR (optional accessory)
USB 1 cable (DC 5 V
1.5 A)
(For
/ )
USB 2 cable (DC 5 V
1.5 A)
Auxiliary cable
Red
(Ignition wire)
Yellow
(Battery wire)
JS_KWD_KDC_X701_KN_EN_4.indd 37 11/14/2016 8:41:46 AM