Owner's Manual

ENGLISH
5
SYSTEM
KEY BEEP
ON :Activates the keypress tone.; OFF :Deactivates.
SOURCE SELECT
PANDORA SRC
ON :Enables PANDORA 1/PANDORA 2/PANDORA in source selection.;
OFF :Disables. ( 12)
IHEART SRC
ON :Enables IHEARTRADIO 1/IHEARTRADIO 2/IHEARTRADIO in source
selection.;
OFF :Disables. ( 13)
BUILT-IN AUX
ON :Enables AUX in source selection.; OFF :Disables. ( 11)
CD READ
1 : Automatically distinguishes between audio file disc and music CD. ;
2 : Forces to play as a music CD. No sound can be heard if an audio file disc
is played.
F/W UPDATE
UPDATE SYSTEM/UPDATE HD
(for / )
F/W UPDATE
xxxx/
F/W UPDATE
Vxx
YES :Starts upgrading the firmware.; NO :Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<www.kenwood.com/cs/ce/>.
FACTORY RESET YES :Resets the settings to default (except the stored station).;
NO :Cancels.
CLOCK
CLOCK DISPLAY
(For / / /
)
ON :The clock time is shown on the display even when the unit is turned
off.;
OFF :Cancels.
ENGLISH
Select the display language for [FUNCTION] menu and music information
if applicable.
By default,
[ENGLISH] is selected.
ESPANOL
Register the marine remote ID (for )
Applicable only when you connect Kenwood Marine Remote Control unit
(KCA-RC55MR, optional accessory) to this unit.
• For connection,
37, Wiring connection .
• Refer also to the supplied instruction manual of the Kenwood Marine
Remote Control unit for more information.
Preparation:
Press
repeatedly to enter STANDBY, then press the volume knob
to enter
[FUNCTION].
1 Turn the volume knob to select an item, then press the knob.
[SYSTEM]  [REMOTE SETTING]  [REMOTE ID SET]
Remote control ID list is displayed.
• [YES] indicates that this ID is already registered.
• [NO] indicates that this ID is available.
2 Turn the volume knob to select an available ID [REMOTE ID1] /
[REMOTE ID2] / [REMOTE ID3] , then press the knob .
“REGISTERING” appears on the display window.
To register, on the Kenwood Marine Remote Control unit:
• Press ENTER to register as [REMOTE ID1] .
• Press SRC to register as [REMOTE ID2] .
• Press DISP to register as [REMOTE ID3] .
Once the ID is registered, “COMPLETED” appears.
To delete the registered ID
1 Turn the volume knob to select an item, then press the knob.
[SYSTEM]  [REMOTE SETTING]  [REMOTE ID DELETE]
2 Turn the volume knob to select the ID to delete [ ID1 DELETE] /
[
ID2 DELETE] /[ ID3 DELETE] , then press the knob.
3 Turn the volume knob to select [YES] to delete the selected ID, and
select
[NO] to cancel.
• To exit, press and hold
.
• To return to the previous setting item, press
.
GETTING STARTED
JS_KWD_KDC_X701_KN_EN_4.indd 5 11/14/2016 8:41:38 AM