Operation Manual

4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Default: XX
AUDIO CONTROL
SWITCH PREOUT
REAR / SUB-W : Selects whether rear speakers or a subwoofer are connected to the line out
terminals on the rear (through an external amplifier).
SP SELECT OFF / 5/4 / 6 × 9/6 / OEM : Selects according to the speaker size (5inches or 4inches,
6×9inches or 6inches) or OEM speakers for optimum performance.
DISPLAY
EASY MENU
(For
KMM-302BT
)
ON :Both display and button illumination change to white color when entering [FUNCTION] .;
OFF :Both display and button illumination remain as [COLOR SELECT] color. ( 12)
TUNER SETTING
PRESET TYPE
NORMAL : Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/
LW). ;
MIX : Memorizes one station for each preset button, regardless of the selected band.
SYSTEM
KEY BEEP
ON :Activates the keypress tone.; OFF :Deactivates.
SOURCE SELECT
BUILT-IN AUX
ON :Enables AUX in source selection.; OFF :Disables. ( 8)
RUSSIAN SET
Selects the display language for [FUNCTION] menu and Tag information (folder name, file
name, song title, artist name, album name) if applicable.
RUSSIAN OFF :Display language is English.; РУССКИЙ BКЛ :Display language is Russian.
P-OFF WAIT Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turns off (while in standby mode) to save
the battery.
20M : 20minutes; 40M : 40minutes; 60M : 60minutes; OFF – – – :Cancels
F/W UPDATE
UPDATE
 SYSTEM/ UPDATE BT
F/W UP xx.xx
YES :Starts upgrading the firmware.; NO :Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
Set the clock
1
Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select [CLOCK] , then press
the knob.
3 Turn the volume knob to select [CLOCK ADJUST] ,
then press the knob.
4 Turn the volume knob to make the settings, then
press the knob.
Day
Hour Minute
5 Turn the volume knob to select [CLOCK FORMAT] ,
then press the knob.
6 Turn the volume knob to select [12H] or [24H] , then
press the knob.
7 Press and hold to exit.
To return to the previous setting item or hierarchy,
press
.
While in clock display screen...
Press and hold DISP SCRL to enter clock
adjustment mode directly.
Then, perform step
4 to set the clock.
Set the initial settings
1
Press B SRC to enter STANDBY.
2 Press the volume knob to enter [FUNCTION] .
3 Turn the volume knob to make a selection (see the
following table), then press the knob.
4 Press and hold to exit.
To return to the previous setting item or hierarchy,
press
.
2
3
GETTING STARTED
JS_KWD_KMM_BT34_EN_01_EN.indd 4JS_KWD_KMM_BT34_EN_01_EN.indd 4 8/11/2013 4:09:40 PM8/11/2013 4:09:40 PM