KMM-BT525HD KMM-X503 KMM-BT325U KMM-BT325 KMM-BT250U KMM-BT225U KMR-M325BT DIGITAL MEDIA RECEIVER INSTRUCTION MANUAL RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE MODE D’EMPLOI RECEPTOR DE MEDIOS DIGITALES MANUAL DE INSTRUCCIONES JVCKENWOOD Corporation For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos) Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos domésticos.
IC (Industry Canada) Notice This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
SOFTWARE LICENSE AGREEMENT The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Article 10 1. 2. Article 11 1. 2. 3. 2. 3. Export Restriction It is prohibited to export the Licensed Software and any related documents outside the country of the User (including transmission thereof outside the country of the User via Internet of other communication tools). The User shall understand that the Licensed Software shall be subject to the export restrictions adopted by the country of User and any other countries.
CONTENTS BEFORE USE BEFORE USE 2 IMPORTANT BASICS 3 GETTING STARTED 4 • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warnings and Cautions in this manual. • Please keep the manual in a safe and accessible place for future reference.
BASICS Faceplate Remote control (RC-406) (supplied for ) Display window Remote sensor (Do not expose to bright sunlight.) Volume knob m @ Detach button Attach Lights up when Bluetooth connection is established.*1 (Page 19) / : USB cable from the rear of the unit. Detach How to reset Reset the unit within 5 seconds after detaching the faceplate. Pull out the insulation sheet when using for the first time. / / : Can be remotely controlled with an optionally purchased remote control.
GETTING STARTED To set the date 7 Turn the volume knob to select [DATE FORMAT], then press the knob. 8 Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob. 9 Turn the volume knob to select [DATE SET], then press the knob. 10 Turn the volume knob to make the settings, then press the knob. Day Month Year or Month Day Year . . 1 Select the display language and cancel the demonstration . .
GETTING STARTED 1 [DISPLAY] [EASY MENU] (For 13~1169:lt.tJ.1:l•l /13M&!!4-ill?f/l:MJit39:li?ffilJ / 13&M9:tl
GETTING STARTED HD Radio™ tuner (for Preparation: Press B SRC repeatedly to enter STANDBY, then press the volume knob to enter [FUNCTION]. You can tune in to both conventional and HD Radio broadcasts. • To find HD Radio stations in your area, visit . . / ) . 1 Turn the volume knob to select an item, then press the knob. [SYSTEM] [REM SETTING] [REMOTE ID SET] Remote control ID list is displayed. • [YES] indicates that this ID is already registered.
UOL@QW ►:I ltl:Lt+il:;QW ►!I HD Radio™ tuner (for / ) Display received emergency alert messages Select an HD Radio multicast channel Many HD Radio stations offer more than one channel programming. This service is called multicasting. While receiving HD Radio multicast channels.... The received emergency alert messages are stored in the Alert Message List, and you can check them later. While listening to the HD RADIO source... Press S / T to select your desired channel (HD1 to HD8).
HD Radio™ tuner (for / RADIO ) (for l:il'JIMS:itfiJ.1•1/l:JM~e=itfiJ.1/1:◄ ~ll'JeatJ.11111 / 131~l~1e:ttiJ.1H /13M;!&kfiJ.1:il) Default: [XX] [TUNER SETTING] I [SEEK MODE] Selects the searching method for S / T buttons when pressed. [AUTO1]: - Automatically search for a station or channel. ; [AUTO2]: Search for a preset station or channel. ; [MANUAL]: Manually search for a station or channel.
RADIO (for / / / / Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then ) [TI] [ON]: Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up). ; [OFF]: Cancels. [PTY SEARCH] (For press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press and hold Q./!::> to exit.
USB/iPod/ANDROID Selectable source: • l:◄ M~!:l ..tfi:l•I /13Mit:J.i•kl: USB FRONT/USB REAR/ iPod FRONT/iPod REAR/ANDROID FRONT/ANDROID REAR • / / / / : USB/iPod USB/ ANDROID Start playback The source changes automatically and playback starts. USB input terminal USB To On the faceplate Play back/pause Press 6 IW. Press ENT IW. Reverse/Fast-forward*4 Press and hold S / T. Press and hold S / T (+). Select a file Press S / T. Press S / T (+). Select a folder*5 Press 2 A / 1 V . Press #FM+/ AM–.
USB/iPod/ANDROID Select music drive Select a file from a folder/list While in USB/USB FRONT/USB REAR source, press 5 repeatedly. For iPod, applicable only when [MODE OFF] is selected. Stored songs in the following drive will be played back. • Selected internal or external memory of a smartphone (Mass Storage Class). • Selected drive of a multiple drive device. 1 Press . 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.
AUX USB/iPod/ANDROID Preparation: • Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. (Page 5) Direct Music Search (using the remote control) 1 Press DIRECT. 2 Press the number buttons to enter a file number. 3 Press ENT IW to search for music. Start listening 1 Connect a portable audio player (commercially available). • To cancel, press or DIRECT. • Not available if Random Play is selected. • Not applicable for iPod USB/iPod FRONT/iPod REAR and ANDROID/ ANDROID FRONT/ANDROID REAR source.
Pandora® Preparation: Install the latest version of the Pandora application on your device (iPhone/iPod touch), then create an account and log in to Pandora. • Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. (Page 5) Create and store a new station . 1 Press 2 Turn the volume knob to select [NEW STATION], then press the knob. 3 Turn the volume knob to select [FROM ARTIST] or [FROM TRACK], then press the knob. A new station is created based on the current artist or current song.
iHeartRadio® Preparation: Install the latest version of iHeartAuto application on your device (iPhone/ iPod touch), then create an account and log in to iHeartRadio. • Select [ON] for [IHEART SRC] in [SOURCE SELECT]. (Page 5) Start listening 1 Start up the iHeartAuto application on your device. 2 Connect your device to the USB input terminal.
Spotify Preparation: Install the latest version of the Spotify application on your device (iPhone/ iPod touch), then create an account and log in to Spotify. • Select [ON] for [SPOTIFY SRC] in [SOURCE SELECT]. (Page 5) On the faceplate Random play*5 Press 3 repeatedly *3. [SHUFFLE ON], [SHUFFLE OFF] On the remote control ( Not available ) *1 *2 *3 *4 KCA-iP102: 30-pin type, KCA-iP103: Lightning type Do not leave the cable inside the car when not used. Available for premium account users only.
SiriusXM® Radio (for 131~M!:tl.tf1:l•l/13&11~93-1tIU/13&M!:tif:ffill/13M;!&kff1:tl) Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit . 1 Press B SRC repeatedly to select SIRIUS XM. 2 Press BAND repeatedly to select a band.
SiriusXM® Radio (for 13M&9:ll.tfi#l•I/1:◄ M&l!J.i•kt/13&M9=1EffiiJ/13M;ll1~kffi=II) SiriusXM Keymode SmartFavorites and TuneStart™ Press and hold the volume knob to change the keymode (channel or replay). (Default: Channel keymode) “ ” lights up when replay keymode is selected. When channel keymode is selected... To On the faceplate Select a channel Press S / T. On the remote control Press S / T (+). Change a channel rapidly Press and hold S / T. Press and hold S / T (+).
SiriusXM® Radio (for I;◄ M~!:ll.tfi#l•I /13MUf:J.i•kl/I3M~9:li¥ffiH/l:◄ M:IMkffi:11) SiriusXM settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. [LOCK SETTING] [MATURE CH]: Selects the SiriusXM-defined lock setting. ; [USER DEFINED]: Selects the individual channels the user wants to lock. ; [OFF]: Cancels. [CHANNEL EDIT]*1 1 Turn the volume knob to select a category, then press the knob.
BLUETOOTH® BLUETOOTH — Connection Depending on the operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit.
BLUETOOTH® Auto Pairing When you connect iPhone/iPod touch to the USB input terminal, pairing request (via Bluetooth) is automatically activated. Press the volume knob to pair once you have confirmed the device name. The following operations may differ or be unavailable depending on the connected phone. To On the faceplate On the remote control Answer a call Press or the volume knob or one of the number buttons (1 to 6). Press Reject a call Press . Press End a call Press . Press ..... .....
BLUETOOTH® *1 This adjustment will not affect the volume of the other sources. *2 Press and hold VOL to continuously increase the volume to 15. *3 Operations may vary according to the connected Bluetooth device. Make a call V You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature. 1 Press [–10] to [+10] ([–4]): The sensitivity of the microphone increases as the number increases.
BLUETOOTH® [PHONE BOOK] (Applicable only if the phone supports PBAP.) 1 Turn the volume knob quickly to enter alphabet search mode (if the phonebook contains many contacts). The first menu (ABCDEFGHIJK) appears. • To go to the other menu (LMNOPQRSTUV or WXYZ1 ), press 2 A / 1V . • To select the desired first letter, turn the volume knob or press S / T, then press the knob. Select “1” to search with numbers and select “ ” to search with symbols. 2 Turn the volume knob to select a name, then press the knob.
BLUETOOTH® Other settings [INITIALIZE] [YES]: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; [NO]: Cancels. 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device paired.
BLUETOOTH® BLUETOOTH — Audio To On the faceplate Repeat play Press 4 [ALL REPEAT], [FILE REPEAT], [REPEAT OFF] Random play While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices. Audio player via Bluetooth 1 Press B SRC repeatedly (or press SRC on the remote control) to select BT AUDIO. • Pressing enters BT AUDIO directly. 2 Operate the audio player via Bluetooth to start playback.
BLUETOOTH® Settings to use KENWOOD Remote application [ANDROID] KENWOOD Remote application is designed to control the KENWOOD car receiver’s operations from the iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via Bluetooth). • For / / / / , “R.APP” indicator on the display window lights up when KENWOOD Remote application is connected. Preparation: • Install the latest version of KENWOOD Remote application on your device before connecting. • For more information, visit
BLUETOOTH® Internet radio via Bluetooth You can listen to internet radio (Pandora, iHeartRadio and Spotify) on the iPhone/iPod touch/Android device via Bluetooth on this unit. • Make sure the USB input terminal is not connected to any device. Listen to Pandora Preparation: Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. (Page 5) 1 Start up the Pandora application on your device. 2 Connect your device via Bluetooth connection.
AUDIO SETTINGS [MANUAL EQ] 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold Q.f!::> to exit. (or using the remote control) 1 Press AUD to enter [AUDIO CONTROL]. 2 Press J/K to select an item, then press ENT IW. To return to the previous setting item, press Q.f!::>. Adjusts your own sound settings for each source.
AUDIO SETTINGS [SOUND EFFECT] [X ‘ OVER] [SOUND RECNSTR] (Sound reconstruction) (Not applicable for RADIO source, AUX source and SIRIUS XM source.) [ON]: Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression. ; [OFF]: Cancels. [SPACE ENHANCE] (Not applicable for RADIO source.) [SML]/[MED]/[LRG]: Virtually enhances the sound space. ; [OFF]: Cancels.
AUDIO SETTINGS [SW LPF SLOPE] [–6DB]/[–12DB]/[–18DB]/[–24DB]: Adjusts the crossover slope. (Selectable only if a setting other than [THROUGH] is selected for [SW LPF FRQ].) [DTA SETTINGS] [SW LPF PHASE] [REVERSE] (180°)/[NORMAL] (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. [SW LPF GAIN] [–8] to [0]: Adjusts the output volume of the subwoofer.
AUDIO SETTINGS DISPLAY SETTINGS • Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS], select the speaker you want to adjust: [FRONT LEFT]/[FRONT RIGHT]/[REAR LEFT]/[REAR RIGHT]/[SUBWOOFER] – You can only select [REAR LEFT], [REAR RIGHT] and [SUBWOOFER] if a setting other than [NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE]. • [R-SP LOCATION] of [CAR SETTING] is selectable only if a setting other than [NONE] is selected for [REAR] of [SPEAKER SIZE].
DISPLAY SETTINGS Other settings [DIMMER] Dims the illumination. [ON]: Dimmer is turned on. [OFF]: Dimmer is turned off. [DIMMER TIME]: Set the dimmer on and off time. 1 Turn the volume knob to adjust the [ON] time, then press the knob. 2 Turn the volume knob to adjust the [OFF] time, then press the knob. Default: [ON]: [6:00PM] ; [OFF]: [6:00AM] [BRIGHTNESS] 1 Select a zone. (See the illustration on page 30.) 2 [LVL 00] to [LVL 31]: Set the brightness level for the selected zone.
REFERENCES ■ Maintenance Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth. Cleaning the connector Detach the faceplate and clean the connector gently with a cotton swab. Be careful not to damage the 11 connector. Connector (on the reverse side of the faceplate) ■ More information For: – Latest firmware updates and latest compatible item list – KENWOOD original application – Any other latest information Visit .
REFERENCES About iHeartRadio • iHeartRadio® is a third-party service, therefore the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable. • Some iHeartRadio® functionality cannot be operated from this unit. About Spotify • Spotify application supports: – iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus (iOS 8 or above) – iPod touch (5th and 6th generation) – Android OS 4.0.
REFERENCES I I I I : I t t Date t t Playing Time back to I: / t 1· / ) / AUX Source name * Only for Date Playing time Turns off the display* Date Turns off the I t Song title/Artist Album title/Artist display* back to the beginning t BT AUDIO t ,•1 • t Channel number Channel name Artist Song title Content information Category name Date back to the beginning It t t t t t t t t t t t t t t USB/USB FRONT/ For MP3/WMA/AAC/WAV/FLAC files: USB REAR Song title/Artist A
REFERENCES Source name/Clock Context title Song title Playing Time Clock back to the beginning BT AUDIO Source name/Clock Song title/Artist Clock back to the beginning t t Clock back to t t t I It It I t It t t Artist Album title Album title/Artist Playing time t I Main display Song title/Artist I SPOTIFY/ SPOTIFY BT Station name t Source name/Clock the beginning t Display information: Main display IHEARTRADIO t Source name/Clock Clock t AUX t ~b 07 r.
TROUBLESHOOTING General Sound cannot be heard. “MISWIRING CHECK WIRING THEN PWR ON” appears. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. “PROTECTING SEND SERVICE” appears. Send the unit to the nearest service center. Source cannot be selected. Check the [SOURCE SELECT] setting. (Page 5) • Sound cannot be heard. • The unit does not turn on. • Information shown on the display is incorrect. Clean the connectors.
TROUBLESHOOTING I ISymptom The number of registered stations has reached its limit. Retry after deleting unnecessary stations from your device. Connect a device (USB) that contains playable audio files. “UPGRADE APP” Make sure you have installed the latest version of the Pandora application on your device. • Reconnect the Android device. • Launch any media player application on the Android device and start playback.
TROUBLESHOOTING The selected channel is unavailable. For more information about the SiriusXM channel lineup, visit . “CHECK ANTENNA” Check that the antenna and its connection are in good condition. “CHECK TUNER” Make sure the SiriusXM Vehicle Tuner is connected to the unit. “NO SIGNAL” Make sure the antenna is mounted outside the vehicle. “SUBSCRIPTION UPDATED – PRESS ENTER TO CONTINUE.” Your subscription is updated. Press the volume knob to continue.
INSTALLATION/CONNECTION Part list for installation Warning • The unit can only be used with a 12 V DC power supply, negative ground. • Disconnect the battery’s negative terminal before wiring and mounting. • Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit. • To prevent short circuit: – Insulate unconnected wires with vinyl tape. – Be sure to ground this unit to the car’s chassis again after installation.
INSTALLATION/CONNECTION Installing the unit (in-dash mounting) Installing the unit (without mounting sleeve) 8~~C) 1 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied/commercially available). ~B) A) Use only the specified screws. Using wrong screws might damage the unit. -------------------------------------------------------Do the required wiring.
INSTALLATION/CONNECTION Wiring connection IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Fuse (10 A) White To front speaker (left) Ignition switch -=--(~~-------------------------------------------------------------'-----If no connections are made, do not let the wire come out from the tab. White/Black Gray To front speaker (right) rli=- -h~ Lt-•.
INSTALLATION/CONNECTION Connecting external components USB cable (DC 5 V 1.5 A) (approx. 1.2 m/4 feet) MIC (Microphone input terminal) (page 19) ~-- - - - ~-y_ 0-J 0 ---------------------0 ----- , . .
SPECIFICATIONS FM Frequency Range 87.9 MHz — 107.9 MHz (200 kHz step) Usable Sensitivity (S/N = 30 dB) 7.2 dBf (0.63 μV/75 Ω) Quieting Sensitivity (DIN S/N = 46 dB) 15.2 dBf (1.58 μV/75 Ω) Tuner Frequency Response (±3 dB) Digital FM AM I : / FM / / 30 Hz — 15 kHz Usable Sensitivity (S/N = 30 dB) 8.2 dBf (0.71 μV/75 Ω) Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.0 μV/75 Ω) Signal-to-Noise Ratio (MONO) 68 dB Stereo Separation (1 kHz) 40 dB Frequency Range 87.9 MHz — 107.
nc~==== SPECIFICATIONS -==~====:::::== _Compliant -:::::::::.with :::::== _MPEG-1/2 -:::::::::.~== -Audio-:::::::::.~==~==----====-:::::::::.==-:::::::::.==-----· Layer-3 Tone Action Band 1: 62.5 Hz ±9 dB WMA Decode Compliant with Windows Media Audio AAC Decode AAC-LC “.aac”, “.m4a” files WAV Decode Linear-PCM FLAC Decode FLAC file (Up to 96 kHz/24 bit) 20 Hz — 20 kHz Input Maximum Voltage 1 000 mV Input Impedance 30 kΩ Bluetooth Version Bluetooth 3.0 Frequency Range 2.402 GHz — 2.
JS_KWD_KMM_BT525HD_KN_EN_4th Draft.
(()} READY ~Radio• ThisHDRadioteeeiverenables: HD2/HD3) Digital Sound) Program Into) Emergency Alerts) ~ iHeart C,spotify· RADIO ·-™ ~: IIIJI Designed for libFLAC Copyright (C) 2000-2009 Josh Coalson Copyright (C) 2011-2013 Xiph.
