Owner's Manual
Table Of Contents
- Instruction Manual
- Software License Agreement
- Contents
- Before Use
- Basics
- Getting Started
- Register the Marine Remote ID (for KMR-M328BT)
- HD Radio™ Tuner (for KMM-BT728HD/KMM-X704)
- Radio (for KMM-BT328U/KMM-BT328/KMM-BT260U/KMM-BT228U/KMR-M328BT)
- USB/iPod
- Pandora® (for KMM-BT728HD/KMM-X704/KMM-BT328U/KMM-BT260U/KMM-BT228U/KMR-M328BT)
- Spotify
- SiriusXM® Radio (for KMM-BT728HD/KMM-X704/KMM-BT328U/KMR-M328BT)
- AUX
- Using Other Applications
- Bluetooth®
- AMAZON ALEXA (for KMM-BT728HD/KMM-X704/KMM-BT328U/KMM-BT260U/KMM-M328BT)
- Audio Settings
- Display Settings
- Installation/Connection
- References
- Troubleshooting
- Specifications
- Quick Start Guide
- Warranty Card
ENGLISH
31
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Audio Settings
[X ‘ OVER]
[TWEETER] [FRQ]
[1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/
[6.3KHZ]/[8KHZ]/[10KHZ]/[12.5KHZ]: Adjusts the
crossover frequency for the tweeter speaker.
[GAIN LEFT]
[–8] to [0]: Adjusts the output volume of the left
tweeter.
[GAIN RIGHT]
[–8] to [0]: Adjusts the output volume of the right
tweeter.
[FRONT HPF] [F-HPF FRQ]
[30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/
[90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/
[220HZ]/[250HZ]: Adjusts the crossover frequency
for the selected speakers (high pass filter). ;
[THROUGH]: All signals are sent to the selected
speakers.
[F-HPF SLOPE]
[–6DB]/[–12DB]/[–18DB]/[–24DB]: Adjusts the
crossover slope.
(Selectable only if a setting other than [THROUGH] is
selected for [F - HPF FRQ].)
[F-HPF GAIN]
[–8] to [0]: Adjusts the output volume of the
selected speaker.
[REAR HPF] [R-HPF FRQ]
Configure the settings for the rear speakers similarly
to the front speakers.
[R-HPF SLOPE]
[R-HPF GAIN]
[SUBWOOFER LPF] [SW LPF FRQ]
[30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/
[90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/
[220HZ]/[250HZ]: Adjusts the crossover frequency
for the subwoofer (low pass filter). ; [THROUGH]: All
signals are sent to the subwoofer.
[SW LPF SLOPE] [–6DB]/[–12DB]/[–18DB]/[–24DB]: Adjusts the
crossover slope.
(Selectable only if a setting other than [THROUGH] is
selected for [SW LPF FRQ].)
[SW LPF
PHASE]
[REVERSE] (180°)/[NORMAL] (0°): Selects the
phase of the subwoofer output to be in line with the
speaker output for optimum performance.
[SW LPF GAIN]
[–8] to [0]: Adjusts the output volume of the
subwoofer.
[DTA SETTINGS]
For settings, see “Digital Time Alignment settings” on page 32.
[CAR SETTINGS]
• (For / )
The following item is selectable only if
[SWITCH PREOUT]
is set to
[SUB-W]
(page 6):
–
[SUB-W LEVEL]
–
[SUBWOOFER SET]
–
[SW LEVEL]
of
[EASY EQ]
–
[SUBWOOFER]
of
[SPEAKER SIZE]
–
[SUBWOOFER LPF]
of
[X ‘ OVER]
–
[SUBWOOFER]
of
[DISTANCE]
and
[GAIN]
in
[DTA SETTINGS]
• The following item is selectable only if
[SUBWOOFER SET]
is set to
[ON]
(page30):
–
[SUB-W LEVEL]
–
[SW LEVEL]
of
[EASY EQ]
–
[SUBWOOFER]
of
[SPEAKER SIZE]
–
[SUBWOOFER LPF]
of
[X ‘ OVER]
–
[SUBWOOFER]
of
[DISTANCE]
and
[GAIN]
in
[DTA SETTINGS]
• The following item is selectable only if a setting other than
[NONE]
is
selected for
[TWEETER]
,
[REAR]
and
[SUBWOOFER]
of
[SPEAKER SIZE]
:
–
[TWEETER]
,
[REAR HPF]
,
[SUBWOOFER LPF]
of
[X ‘ OVER]
JS_KWD_KMM_BT728HD_KN_EN.indd 31JS_KWD_KMM_BT728HD_KN_EN.indd 31 4/25/2019 2:59:30 PM4/25/2019 2:59:30 PM