Owner's Manual

ENGLISH
45
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Troubleshooting
Symptom Remedy
Bluetooth®
“NO ENTRY”/“NO PAIR” There is no registered device connected/found via
Bluetooth.
“ERROR” Try the operation again. If “ERROR” appears again, check if
the device supports the function you have tried.
“NO INFO”/“NO DATA” Bluetooth device cannot get the contact information.
“HF ERROR XX”/
“BT ERROR”
Reset the unit and try the operation again. If this does not
solve the problem, consult your nearest service center.
“SWITCHING NG” The connected phones might not support phone switching
feature.
The Bluetooth connection
between the Bluetooth
device and the unit is
unstable.
Delete the unused registered Bluetooth device from the
unit. (Page 26)
AMAZON ALEXA
No response from Alexa
after the voice input.
Amazon cloud was unable to analyze the voice input.
Wrong response from
Alexa.
Alexa misunderstood what was said or did not catch
the entire request or sentence spoken. Please try again.
(Page 28)
“DISCONNECTED” Be sure to connect your smartphone to the unit via
Bluetooth. (Page 22)
Not able to connect or
reconnect to Alexa mobile
application.
Be sure the audio device is connected via Bluetooth. Select
the audio device from [AUDIO SELECT] in [BT MODE].
(Page 26)
Perform the one-time setup process again. See “Setup for
the first time” on page 28.
Turn off, then turn on the unit and try to connect again.
For iOS device, make sure ALEXA source or iPod BT source
is selected.
Specifications
Tuner
/ :
FM Frequency Range 87.9 MHz — 107.9 MHz (200 kHz step)
Usable Sensitivity
(S/N = 30 dB)
7.2 dBf (0.63 μV/75 Ω)
Quieting Sensitivity
(DIN S/N = 46 dB)
15.2 dBf (1.58 μV/75 Ω)
Frequency Response (±3 dB) 30 Hz — 15 kHz
Signal-to-Noise Ratio (MONO) 68 dB
Stereo Separation (1 kHz) 40 dB
Digital
FM
Frequency Range 87.9 MHz — 107.9 MHz (200 kHz step)
Frequency Response (±3 dB) 20 Hz — 20 kHz
Signal-to-Noise Ratio (STEREO) 75 dB
AM Frequency Range 530 kHz — 1 700 kHz (10 kHz step)
Usable Sensitivity (S/N = 20 dB) 29 dBμ (28.2 μV)
Digital
AM
Frequency Range 530 kHz — 1 700 kHz (10 kHz step)
Frequency Response (±3 dB) 40 Hz — 15 kHz
Signal-to-Noise Ratio (STEREO) 70 dB
JS_KWD_KMM_BT728HD_KN_EN.indd 45JS_KWD_KMM_BT728HD_KN_EN.indd 45 6/21/2019 1:38:40 PM6/21/2019 1:38:40 PM