KMM-BT332 KMM-BT270U KMM-BT232U KMR-M332BT DIGITAL MEDIA RECEIVER INSTRUCTION MANUAL RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE MODE D’EMPLOI RECEPTOR DE MEDIOS DIGITALES MANUAL DE INSTRUCCIONES For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos) Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos domésticos.
ISED Caution This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
SOFTWARE LICENSE AGREEMENT The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Article 9 Destruction of the Licensed Software If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed Software, any related documents and copies thereof within two (2) weeks from such date of termination. Article 10 1. 2. The copyright and all the other intellectual property rights relating to the Licensed Software shall belong to the Licensor and the Original Rightholder, and in no event shall they be under the ownership of the User.
-CMP The MIT License (MIT) Copyright (c) 2014 Charles Gunyon Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyrigh
Copyright (c) 1995, 1996 Carnegie-Mellon University. All rights reserved. Author: Chris G. Demetriou Permission to use, copy, modify and distribute this software and its documentation is hereby granted, provided that both the copyright notice and this permission notice appear in all copies of the software, derivative works or modified versions, and any portions thereof, and that both notices appear in supporting documentation. CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" CONDITION.
Contents Before Use ................................................................................................. 3 References .............................................................................................. 31 Basics ......................................................................................................... 4 Maintenance Getting Started ........................................................................................
Before Use IMPORTANT • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warnings and Cautions in this manual. • Please keep the manual in a safe and accessible place for future reference. WARNING • Do not operate any function that takes your attention away from safe driving. • Do not ingest the battery, Chemical Burn Hazard. The remote control supplied with this product contains a coin/button cell battery.
Basics Faceplate Attach Volume knob Detach How to reset Reset the unit within 5 seconds after detaching the faceplate. Detach button Display window*1 To On the faceplate Turn on the power Press B SRC. • Press and hold to turn off the power.*2 Adjust the volume Turn the volume knob. Select a source • Press B SRC repeatedly. • Press B SRC, then turn the volume knob within 2 seconds. Change the display information*3 Press DISP repeatedly. (Page 32, 33) *1 Only for illustration purpose.
Getting Started Basics Remote control (RC-406) Remote sensor (Do not expose to bright sunlight.) Pull out the insulation sheet when using for the first time. : Can be remotely controlled with an optionally purchased remote control. / / : Remote control functions are not available.
Getting Started To set the date 7 Turn the volume knob to select [DATE FORMAT], then press the knob. 8 Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob. 9 Turn the volume knob to select [DATE SET], then press the knob. 10 Turn the volume knob to make the settings, then press the knob. Set the date in the order of “Day” “Month” “Year” or “Month” “Day” “Year”. 11 Press and hold [DISPLAY] [EASY MENU] For / : When entering [FUNCTION]...
Getting Started 1 Turn the volume knob to select an item, then press the knob. [F/W UPDATE] [UPDATE SYSTEM] [F/W UP xxxx] [FACTORY RESET] [ENGLISH] [ESPANOL] [FRANCAIS] [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not activated). For details on how to update the firmware, visit . • Once you have upgraded the firmware, you are unable to downgrade the firmware. [YES]: Resets the settings to default (except the stored station). ; [NO]: Cancels.
Radio Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the • “ST” indicator lights up when receiving an FM stereo broadcast with sufficient signal strength. • The unit switches to FM alarm automatically when receiving an alarm signal from FM broadcast. instructions stated on the selected item. to exit.
USB/iPod Radio [TI] [ON]: Allows the unit to temporarily switch to Traffic Information if available (“TI” indicator lights up) while listening to all sources except in AM. ; [OFF]: Cancels. [PTY SEARCH] For / / : Select the available Program Type (for Radio Broadcast Data System, see page 32), then press S / T to start. : For 1 Turn the volume knob to select the available Program Type (for Radio Data System, see page 32), then press the knob.
USB/iPod Basic operations Select music drive While in USB source, press 5 repeatedly. Stored songs in the following drive will be played back. • Selected internal or external memory of a smartphone (Mass Storage Class). • Selected drive of a multiple drive device. (This unit can support multiple drive device of up to 4 drives. However, this unit may take some time to read if three or more cards are connected.
USB/iPod Select a file to play From a folder or list . 1 Press 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob. Selected file starts playing. Quick search (applicable only for USB source) [SKIP SEARCH] setting 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [USB], then press the knob. 3 Turn the volume knob to select [SKIP SEARCH], then press the knob.
SiriusXM® Radio (for ) Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. • For more information, visit . Preparation: 1 Connect the optional SiriusXM Vehicle Tuner (commercially available).
SiriusXM® Radio (for ) When replay keymode is selected... Parental Control The Parental Control feature allows you to limit access to any SiriusXM channels, including those with mature content. When enabled, the Parental Control feature requires you to enter a pass code to tune to the locked channels. • Information on setting up the pass code and locking channels can be found on page 14. SiriusXM Keymode Press and hold the volume knob to change the keymode (channel or replay).
SiriusXM® Radio (for ) TuneScan™ [CHANNEL LOCK] You can get a short preview of the songs that you have missed on each of your SmartFavorites music channels or a music channel currently tuned into. Press and hold BAND to start scanning the first 6 seconds of the recorded music contents. • To listen to the current song, press the volume knob to stop scanning. The unit continues playing the current song. • To select the previous/next song, press S / T. • To cancel scanning, press and hold the volume knob.
AUX KENWOOD Remote Application You can listen to music from a portable audio player via the auxiliary input jack. You can control the KENWOOD car receiver from iPhone/iPod touch (via Bluetooth or via USB input terminal) or Android device (via Bluetooth) using KENWOOD Remote application. • For more information, visit . Preparation: Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT].
Bluetooth® KENWOOD Remote Application 3 Repeat step 2 until the desired item is selected/activated. 4 Press and hold to exit. To return to the previous setting item, press . Default: [XX] [REMOTE APP] [SELECT] [IOS] Selects the device ([IOS] or [ANDROID]) to use the application. [YES]: Selects iPhone/iPod touch to use the application via Bluetooth or connected via USB input terminal. ; [NO]: Cancels.
Bluetooth® Pair and connect a Bluetooth device for the first time 1 Press B SRC to turn on the unit. 2 Search and select the name of your receiver (“KMM-BT332”/ “KMM-BT270U”/“KMM-BT232U”/“KMR-M332BT”) on the Bluetooth device. “PAIRING” “PASS XXXXXX” “Device name” “PRESS” “VOLUME KNOB” appears on the display. • For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code immediately after searching. 3 Press the volume knob to start pairing.
Bluetooth® The following operations may differ or be unavailable depending on the connected phone. To On the faceplate *1 This adjustment will not affect the volume of the other sources. *2 Press and hold VOL to continuously increase the volume to 15. *3 Operations may vary according to the connected Bluetooth device. On the remote control Improve the voice quality First incoming call... Answer a call Press or the volume knob or one of the number buttons (1 to 6). Press Reject a call Press .
Bluetooth® Make a call [PHONE BOOK] You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature. 1 Press to enter Bluetooth mode. “(First device name)” appears. • If two Bluetooth phones are connected, press again to switch to the other phone. “(Second device name)” appears. 2 Turn the volume knob to select an item (see the following table), then press the knob.
Bluetooth® Make a call using voice recognition 1 Press and hold to activate the voice recognition of the connected phone. 2 Speak the name of the contact you want to call or the voice command to control the phone functions. • Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details. Bluetooth mode settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob.
Bluetooth® [INITIALIZE] [YES]: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; [NO]: Cancels. Bluetooth test mode Bluetooth — Audio • Operations and display indications may differ according to their availability on the connected device. • Depending on the connected device, some features may not work with your device. You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device paired.
Audio Settings Bluetooth® To On the faceplate Repeat play Press 4 repeatedly. [ALL REPEAT], [FILE REPEAT], [GROUP REPEAT], [REPEAT OFF] Random play Press and hold 3 to select [ALL RANDOM] or [GROUP RANDOM]*. Select a file from a folder/list Refer to “Select a file to play” on page 11. Switch between connected Bluetooth audio devices Press 5. (Pressing the “Play” key on the connected device itself also causes switching of sound output from the device.) • Press 3 to select [RANDOM OFF].
Audio Settings [MANUAL EQ] [62.5HZ] Adjusts your own sound settings for each source. • The settings are stored to [USER] in [PRESET EQ]. • The settings made may affect the current settings of [EASY EQ]. [LEVEL] [BASS EXTEND] [LEVEL –9] to [LEVEL +9] ([LEVEL 0]): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.) [Q FACTOR] [SOUND RECNSTR] (Not applicable for RADIO source, AUX source and SIRIUS XM source.
Audio Settings [X ‘ OVER] [TWEETER] [FRONT HPF] [REAR HPF] [FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/ [6.3KHZ]/[8KHZ]/[10KHZ]/[12.5KHZ]: Adjusts the crossover frequency for the tweeter speaker. [GAIN LEFT] [–8] to [0]: Adjusts the output volume of the left tweeter. [GAIN RIGHT] [–8] to [0]: Adjusts the output volume of the right tweeter.
Audio Settings Digital Time Alignment settings Digital Time Alignment sets the delay time of the speaker output to create a more suitable environment for your vehicle. • For more information, see the following “Determining the delay time automatically”. [DTA SETTINGS] [POSITION] Selects your listening position (reference point). [ALL]: Not compensating ; [FRONT RIGHT]: Front right seat ; [FRONT LEFT]: Front left seat ; [FRONT ALL]: Front seats [DISTANCE] [0FT] to [20.
Display Settings Zone identification for color settings and brightness settings Default: [XX] [DISPLAY] [COLOR SELECT] Zone identification for brightness setting For / : Selects illumination colors for [ALL ZONE], [ZONE 1] and [ZONE 2] separately. 1 Select a zone. (See the illustration on left column.) 2 Select a preset color for the selected zone. (Page 27) Default: : [VARIABLE SCAN] : [INITIAL COLOR] To make your own color, select [CUSTOM R/G/B].
Installation/Connection Display Settings [LEVEL METER] For / : [ON]: Shows the level meter on the display window (as shown below). ; [OFF]: Cancels. Level meter [CLOCK] [CLOCK DISPLAY] (Except for ) [ON]: The clock time is shown on the display even when the unit is turned off. ; [OFF]: Cancels. [DEMO MODE] (Except for ) [ON]: Activates the display demonstration automatically if no operation is done for about 15 seconds. ; [OFF]: Deactivates. This section is for the professional installer.
Installation/Connection Part list for installation Installing the unit (in-dash mounting) (A) Faceplate (×1) (B) Trim plate (×1) (C) Mounting sleeve (×1) (D) Wiring harness (×1) (E) Extraction key (×2) (F) Screws* 1 2 M5 × 7 mm (×4) Do the required wiring. (Page 30) M5 × 6 mm (×4) M4 × 8 mm (×1) * Supplied for / . Basic procedure 1 Remove the key from the ignition switch, then disconnect the terminal of the car battery.
Installation/Connection Installing the unit (without mounting sleeve) Connect external components 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied/commercially available). Use only the specified screws. Using wrong screws might damage the unit.
Installation/Connection Wiring connection IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Fuse (10 A) Antenna terminal White To front speaker (left) Gray To front speaker (right) Gray/Black Green To rear speaker (left) To rear speaker (right) Ignition switch If no connections are made, do not let the wire come out from the tab.
References Installation/Connection Connect external amplifiers via output terminals When connecting an external amplifier to the output terminals of this unit, securely connect the amplifier ground wire to the car chassis to prevent damage to the unit. Model Output terminals / / REAR: Rear output FRONT: Front output SW: Subwoofer output REAR/SW: Rear/subwoofer output Maintenance Cleaning the unit Wipe off dirt on the faceplate with a dry silicone or soft cloth.
References About iPod/iPhone • Made for – iPod touch (6th generation) – iPhone 5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XS, XS MAX, XR, 11, 11 Pro, 11 Pro MAX, SE (2nd generation), 12, 12 Mini, 12 Pro, 12 Pro MAX • The song order displayed on the selection menu of this unit may differ from that of the iPod/ iPhone. • Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit.
Troubleshooting References For / : Each time you press DISP, the display information changes. • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg. station name) appears or display will be blank. Symptom Remedy Sound cannot be heard. • Adjust the volume to the optimum level. • Check the cords and connections. “MISWIRING CHECK WIRING THEN PWR ON” appears. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly.
Troubleshooting 34 USB device, the folders are played in the order of creation (date and time). The files within each folder are played in the order of the file name (alphabet). Elapsed playing time is not correct. This depends on the recording process earlier (USB). “READING” keeps flashing. • Do not use too many hierarchical levels and folders. • Reattach the device (USB/iPod/iPhone). “UNSUPPORTED DEVICE” appears.
Troubleshooting “CODE ERROR” Remedy “NO CONTENT” There is insufficient content to start TuneScan. “SCAN CANCEL” TuneScan has been aborted. No Bluetooth device is detected. • Search from the Bluetooth device again. • Reset the unit. (Page 4) Bluetooth pairing cannot be made. • Make sure you have entered the same PIN code to both the unit and Bluetooth device. • Delete pairing information from both the unit and the Bluetooth device, then perform pairing again.
Specifications FM Frequency Range / / : 87.9 MHz — 107.9 MHz (200 kHz step) Usable Sensitivity (S/N = 30 dB) 8.2 dBf (0.71 μV/75 Ω) Quieting Sensitivity (DIN S/N = 46 dB) 17.2 dBf (2.0 μV/75 Ω) USB Tuner : 87.5 MHz — 108.0 MHz (50 kHz step) Frequency Response (±3.0 dB) 30 Hz — 15 kHz Signal-to-Noise Ratio (MONO) Stereo Separation (1 kHz) AM Frequency Range 40 dB 530 kHz — 1 700 kHz (10 kHz step) 29 dBμ (28.2 μV) Bluetooth Usable Sensitivity (S/N = 20 dB) 64.0 dB 36 USB Standard USB 1.
20 Hz — 20 kHz Operating Voltage 12 V DC car battery Input Maximum Voltage 1 000 mV Installation Size (W × H × D) Input Impedance 30 kΩ 182 mm × 53 mm × 100 mm (7-3/16" × 2-1/16" × 3-15/16") Maximum Output Power 50 W × 4 Full Bandwidth Power (at less than 1 % THD) 22 W × 4 Speaker Impedance 4Ω—8Ω Tone Action Band 1: 62.5 Hz ±9 dB Band 2: 100 Hz ±9 dB Band 3: 160 Hz ±9 dB Band 4: 250 Hz ±9 dB Band 5: 400 Hz ±9 dB Band 6: 630 Hz ±9 dB Band 7: 1 kHz ±9 dB Band 8: 1.6 kHz ±9 dB Band 9: 2.
• Windows Media is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft.
ENGLISH FRANÇAIS ESPAÑOL KMM-BT332 KMM-BT270U KMM-BT232U KMR-M332BT DIGITAL MEDIA RECEIVER For detailed operations and information, refer to the INSTRUCTION MANUAL on the following website: Pour les opérations et les informations détaillées, reportezvous au MODE D’EMPLOI sur le site web suivant: Para obtener más información y detalles sobre las operaciones, consulte el MANUAL DE INSTRUCCIONES en el siguiente sitio web: Quick Start Guide RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE Guide de démarrage rapide RECEPTOR
Información acerca de la eliminación de equipos eléctricos y electrónicos al final de la vida útil (aplicable a los países que hayan adoptado sistemas independientes de recogida de residuos) Los productos con el símbolo de un contenedor con ruedas tachado no podrán ser desechados como residuos domésticos.
ISED Caution This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
SOFTWARE LICENSE AGREEMENT The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement.
Article 9 Destruction of the Licensed Software If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed Software, any related documents and copies thereof within two (2) weeks from such date of termination. Article 10 1. 2. The copyright and all the other intellectual property rights relating to the Licensed Software shall belong to the Licensor and the Original Rightholder, and in no event shall they be under the ownership of the User.
-CMP The MIT License (MIT) Copyright (c) 2014 Charles Gunyon Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyrigh
Copyright (c) 1995, 1996 Carnegie-Mellon University. All rights reserved. Author: Chris G. Demetriou Permission to use, copy, modify and distribute this software and its documentation is hereby granted, provided that both the copyright notice and this permission notice appear in all copies of the software, derivative works or modified versions, and any portions thereof, and that both notices appear in supporting documentation. CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" CONDITION.
Installation/Connection This section is for the professional installer. For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer. WARNING • The unit can only be used with a 12 V DC power supply, negative ground. • Disconnect the battery’s negative terminal before wiring and mounting. • Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit.
Part list (supplied) (A) (B) (C) (D) (E) Faceplate (×1) Trim plate (×1) Mounting sleeve (×1) Wiring harness (×1) Extraction key (×2) Wiring connection (F) Screws (supplied for ) M5 × 7 mm (×4) M5 × 6 mm (×4) M4 × 8 mm (×1) / Antenna terminal Fuse (10 A) If no connections are made, do not let the wire come out from the tab. Installing the unit (without mounting sleeve) 1 Remove the mounting sleeve and trim plate from the unit.
Before Use Basics IMPORTANT Faceplate • To ensure proper use, please read through this Guide before using this product. It is especially important that you read and observe Warnings and Cautions in this Guide. • Please keep the Guide in a safe and accessible place for future reference. Volume knob USB input terminal WARNING Do not operate any function that takes your attention away from safe driving.
To On the faceplate Turn on the power Press B SRC. • Press and hold to turn off the power. Adjust the volume Turn the volume knob. Select a source Press B SRC repeatedly. Change the display information Press DISP repeatedly. To adjust the clock 3 Turn the volume knob to select [CLOCK ADJUST], then press the knob. 4 Turn the volume knob to make the settings, then press the knob. Set the time in the order of “Hour” “Minute”. 5 Turn the volume knob to select [CLOCK FORMAT], then press the knob.
Default: [XX] USB/iPod [SYSTEM] [KEY BEEP] [ON]: Activates the keypress tone. ; [OFF]: Deactivates. [FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ; [NO]: Cancels. [ENGLISH] [ESPANOL] [FRANCAIS] Select the display language for [FUNCTION] menu and music information if applicable. By default, [ENGLISH] is selected. Radio Search for a station 1 Press B SRC repeatedly to select RADIO. 2 Press BAND repeatedly to select FM1/FM2/FM3/AM.
Examples of some well-used settings Functions Settings 1 2 3 4 Subwoofer Level Setting Press the volume knob to enter [FUNCTION]. Turn the volume knob to select an item, then press the knob. Repeat step 2 until the desired item is selected or activated. Press and hold to exit. To return to the previous setting item, press . • Refer to the INSTRUCTION MANUAL on the following website for the detailed explanation of each item:
Illumination Color Setting For / color for each zone. 6 Repeat step 4 and step 5 to set color for other zones. 7 Press and hold to exit. , you can set your preferred illumination Other Information 1 Press the volume knob to enter [FUNCTION]. For playback operations of AUX and SiriusXM® Radio sources, refer to the INSTRUCTION MANUAL on the following website: • The availability of each source vary depending on the model.
Bluetooth® • Depending on the Bluetooth version, operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit. • Be sure to turn on the Bluetooth function of the device to make the following operations. • Signal conditions vary depending on the surroundings. Once pairing is completed, Bluetooth connection is established automatically. / : “BT1 CONNECTED” and/or “BT2 CONNECTED” • appears on the display window for 2 seconds.
• Windows Media is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft.
MILITARY Units purchased through the U.SA military exchange service overseas m.1y be serviced under warranty in the continental U.S.A., subject to the following conditions 1) The original warranty is in ettect. 2) Proor of purchase is provided to the servicer. Any and all implied warranties, including warranties of merchantability and fitness for a particular purpose, shall be limited in duration to the length ol this warranty.
U .S.A. JVCKENWOOD USA Corporation Th,s warranty will be honored only in the U.S.A WHO IS PROTECTED This warranty is enlorceable only by the original purchaser. KENWOOD LIMITED WARRANTY FOR CAR STEREO COMPONENTS WHAT WE WILL PAY FOR We will pay for all labor and malerial expenses for covered items.
