KRC-108S CASSETTE RECEIVER INSTRUCTION MANUAL AMPLI-TUNER-LECTEUR DE CASSETTE MODE D’EMPLOI RADIO CASETE MANUAL DE INSTRUCCIONES RADIO CASSETE MANUAL DE INSTRUÇÕES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new cassette-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
English Contents Before use Safety precautions ........................................................................3 General features Power............................................................................................5 Switching Modes ..........................................................................5 Volume ..........................................................................................6 Attenuator .......................................................................
Safety precautions 2WARNING 2CAUTION To prevent injury or fire, take the following precautions: To prevent damage to the machine, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery, or ground wires, make sure to use automotivegrade wires or other wires with a 0.75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating.
English Safety precautions Cleaning the Unit NOTE • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. KRC-108S If the front panel gets dirty, turn off the power and wipe the panel with a dry silicon cloth or soft cloth.
General features u Power SRC / PWR OFF ATT/LOUD 4 Turning on the power: Press the SRC (source) button. CLK ¢ NOTE KRC-108S Turn the power on before carrying out the following procedures. Turning off the power: Press the PWR OFF button for at least one second.
English General features Volume Increasing Volume: Press the u button to turn up the volume. Decreasing Volume: Press the d button to turn down the volume. Attenuator This function allows you to turn down the volume quickly. Turning Attenuator On/Off: Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks. When the attenuator is off, the volume returns to the original level.
"FD": Adjust the fader level. Setting values: Front 15 - Rear 15 Adjusting Time Adjust the time. 1 When the time is not displayed, first press the CLK button to display the time. ec4/dB (Sound Coordinate) You can recall the best audio setting preset for different types of the music. 2 Press the CLK button for at least two seconds to enter the clock adjustment mode. The time display will blink. 3 • Adjusting the hours Press the BAND button to advance the hours.
English Tuner features Tuning SRC / PWR OFF 4 You can choose between auto seek tuning of receivable frequencies and manual tuning. BAND / ¢ CRSC 1 Press the SRC (source) button repeatedly to select the tuner mode."TUuE" is displayed when the tuner mode has been selected. KRC-108S 2 Press the BAND button to select the band. Each time you press the BAND button, the band switches between FM1, FM2, FM3, and AM. 3 Press the AUTO button to switch between auto seek tuning and manual tuning.
The number of the recalled station is displayed. unstable sound quality when CRSC is turned on. In such a situation, turn it off. NOTE You can store six stations in each of the FM1, FM2, FM3, and AM bands. Auto Memory Entry You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available.
English Cassette player features Playing Cassette Tapes SRC / PWR OFF 0 REW FF KRC-108S T.CALL Loading and Playing Cassettes: Load a cassette with the tape exposed on the right. The tape starts playing automatically. With side A facing up, the 3 indicator lights up when side A is playing, and 2 when side B is playing. The 2 3 indicator lights up while play is paused. Playing Cassettes Already Loaded: Press the SRC (source) button repeatedly to select the tape mode.
Tuner Call Switch automatically to the tuner while you are rewinding or fast forwarding the tape. Turning Tuner Call On/Off: Press the T.CALL button to switch tuner call on and off. The T.CALL indicator lights up when tuner call is turned on.
Accessories English External view Installation Procedure Number of items 1 ..........................................1 2 ..........................................1 3 ..........................................2 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the speaker wires of the wiring harness. 4.
Connecting Wires to Terminals Fuse (10A) FM/AM antenna input If no connections are made, do not let the wire come out from the tab. Wiring harness (Accessory1) White/Black Connect either to the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle. P.CONT.OUT ANT. CONT.
Installation ■ Installing in Japanese-Made Cars English ■ Installation 1 Refer to the section “Removing the hard rubber frame (P. 15)” Firewall or metal support and then remove the hard rubber frame. 2 Align the holes in the unit (two locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws. Accessory4 T N 8 mm MAX.
■ Removing the hard rubber frame ■ Removing the Unit 1 Engage the catch pins on the removal tool and remove the two 1 Refer to the section “Removing the hard rubber frame” and locks on the lower level. Lower the frame and pull it forward as shown in the figure. 2 Remove the Hex-head screw with integral washer (M4×8) on then remove the hard rubber frame. the back panel. Catch 3 Insert the two removal tools deeply into the slots on each side, as shown.
Troubleshooting Guide English What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. PROBLEM POSSIBLE CAUSE SOLUTION The power does not turn on. The fuse has blown. After checking for short circuits in the wires, replace the fuse with one with the same rating. No sound can be heard, or the volume is low. Attenuator is turned on. Turn off Attenuator.
Specifications Specifications subject to change without notice. FM tuner section Audio section Frequency Range (200 kHz Space) .............87.9 MHz -107.9 MHz Usable Sensitivity (S/N: 30dB)......................9.3 dBf (0.8 µV/75 Ω) Quieting Sensitivity (S/N: 50dB) .................15.2 dBf (1.6 µV/75 Ω) Frequency Response (±3.0dB) .................................30 Hz-15 kHz Signal to Noise ratio .............................................70 dB (MONO) Selectivity .....................................