Operation Manual

For the operation method refer to <Auto Memory Entry> (page
11).
Auto Memory Entry <In Tuner mode>
Sets the tuning mode.
Tuning mode Display Operation
Auto seek "Auto 1"/ "AUTO 1" Automatic search for
a station.
Preset station seek "Auto 2"/ "AUTO 2" Search in order of the
stations in the Preset
memory.
Manual "Manual"/ "MANUAL" Normal manual tuning
control.
Tuning Mode <In Tuner mode>
Only stations whose reception is good are searched for in auto
seek tuning.
Display Setting
"Local.S OFF"/ "LO.S OFF" The local seek function is OFF.
"Local.S ON"/ "LO.S ON" The local seek function is ON.
Local Seek <In Tuner mode>
It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
Display and Setting
"NEWS OFF"
"NEWS 00MIN"/"NEWS 00M"
"NEWS 90MIN"/"NEWS 90M"
When "NEWS 00MIN"/"NEWS 00M" — "NEWS 90MIN"/"NEWS
90M" is set, the News Bulletin Interrupt function is ON.
When it's ON, the "NEWS" indicator is ON.
When the news bulletin starts, "News"/"NEWS" is displayed, and
it switches to the news bulletin.
• If you choose the "20MIN"/ "20M" setting, further news bulletins
will not be received for 20 minutes once the first news bulletin is
received.
• The news bulletin volume is the same level that was set for
<Traffic Information> (page 12).
• This function is only available if the desired station sends PTY-code
for news bulletin or belongs to <Enhanced Other Network>-
Network sending PTY-code for news bulletin.
• When the News Bulletin Interrupt function is ON, it switches to an
FM station.
…
News Bulletin with Timeout Setting
Display and Setting
"Contrast 0"/ "CONT 0"
"Contrast 10"/ "CONT 7"
…
— 23 —
KRC-694(E)_U.S_r4 02.11.18 10:32 AM Page 23