KTC-D500E DIGITAL TV TUNER INSTRUCTION MANUAL C B64-3808-00/00 (E) KTC-D500E.indb 1 07.7.
Contents Safety precautions 3 Notes Getting Started 5 Displaying EPG Switching to Digital TV Screen ÅıÇ Functions During Digital TV Screen Åı Functions During Digital TV Screen Ç Touch Operation Å Basic Operation (When connected with DDX7029 Å) Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen 5 5 6 6 7 7 Displaying the Easy Control Panel Displaying the TV Control screen Basic Operation (When connected with LZ-760R Ç) Functions While Displaying the Con
Safety precautions 2WARNING • Mounting and wiring this product requires skills and experience. For safety’s sake, leave the mounting and wiring work to professionals. 2CAUTION • Make sure to ground the unit to a negative 12V DC power supply. • Use only the screws provided or specified for installation. If you use wrong screws, you could damage the unit.
Notes Monitor units that can be connected to this unit • Å group DNX7200 KVT-829DVD KVT-729DVD DDX8029 DDX7029 KOS-V500 KOS-V1000 • ı group DDX6029 KVT-827DVD KVT-727DVD KVT-627DVD DDX8027 DDX6027 KVT-M707 • Ç group LZ-760R • Î group Unit with RCA video input This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.
Getting Started Lets view some digital broadcasts. A B C Switching to Digital TV Screen Press [V.SEL] on the monitor to switch to Digital TV Broadcasting. Functions During Digital TV Screen A B Basic functions are available even when the TV screen is displayed. 1 2 4 3 5 Preset 3 Mode : F u l l TV TV1 AUTO1 2ch AV- O U T: AV- I N 6 TV AUTO1 TV1 1 Picture Source Display Area Displays the TV Status, Display Mode, and AVOUT settings (page 13).
Getting Started C Functions During Digital TV Screen Basic functions are available even when the TV screen is displayed. 1 A Touch Operation Menu Control Screen appears by touching the area shown below. 3 2 1 Channel Down Search Area Searches downward and selects the channel. 2 Control Screen Display Area Switches to Control Screen. 3 Channel Up Search Area Searches upward and selects the channel. ⁄ • When the Control Screen is displayed, touch [OK] or wait approximately 10 seconds.
Basic Operation (When connected with DDX7029 Å) Various control screens appear in the Digital TV Source mode. (You can only operate Digital TV with the optional accessory Digital TV Tuner connected.) Functions When Displaying the Easy Control Panel Functions While Displaying the Control Screen Displays a floating control panel in the screen. Switches to control screen to use various playback functions.
Basic Operation (When connected with DDX6029 ı) Various control screens appear in the Digital TV/ Video Source mode. (You can only operate Digital TV with the optional accessory Digital TV Tuner connected.) Displaying the Easy Control Panel Displaying the TV Control screen The Control Panel is displayed in a floating position of the TV picture. You can tune in a TV station using various functions.
Basic Operation (When connected with LZ-760R Ç) Various control screens appear in the Digital TV Source mode. (You can only operate Digital TV with the optional accessory Digital TV Tuner connected.) Functions While Displaying the Control Screen You can tune in a TV station using various functions. 1 1 2 1 Select a channel. 2 Closes Control Screen and shows Digital TV screen. ⁄ • Buttons other than mentioned above are disabled in DVB mode. English KTC-D500E.indb 9 9 07.7.
Displaying EPG Receiving and displaying EPG (Electronic Program Guide) sent together with a program. Viewing the Program Guide You can check the programs on each channel in the EPG (Electronic Program Guide). 1 Show EPG by pressing [EPG] key EPG appears. 2 Select the channel or time to display On the EPG, you can change the displayed channel by touching [5] or [∞] and time frame by touching [2] or [3].
Channel Search and Channel List The available stations (TV/Radio) are saved in the Channel List. Searching for currently available station (Auto Scan) Manually Searching Station (Manual Search) Search for currently available stations and save them in the Channel List. Search a station by specifying area or channel.
Channel Search and Channel List Selecting a station from Channel List Erasing Channel List Stations that are available by Auto Scan or other methods are saved in the Channel List. Erase channels registered in the Channel List.
Setup Setting this unit's behavior and clock. System Setup 1 Show DVB Menu by pressing [MENU] key Set the behavior of this unit such as the display language and aspect ratio. 2 Touch [5] or [∞], select [Setup] The following items can be set: OSD Language User could select the desired language. TV Aspect Ratio This function provides 4:3 and 16:9 two ratio for user to select. If your display supports 16:9 screen format and selected channel provides 16:9 format program, select 16:9.
Setup Setting the Clock Updating the Software Set the clock to the network. Also set the time zone and summer time as necessary. Download the new software from the network and update the software installed in this unit.
Restoring to Factory Default Restore this unit's settings to factory default. 1 Show DVB Menu by pressing [MENU] key 2 Touch [5] or [∞], select [Setup] 3 Touch [3] 4 Touch [5] or [∞], select [Factory Default] A confirmation message appears. 5 Touch [2] or [3] to show [OK] 6 Touch [OK] English KTC-D500E.indb 15 15 07.7.
Information and Conax Displaying information and setting Conax. Displaying Information Setting CA Control Display various system information, smart card expiration date, and Conax information. Set channel access control (CA Control) for channels broadcasting programs of specific genre. 1 Show DVB Menu by pressing [MENU] key 1 Show DVB Menu by pressing [MENU] key 2 Touch [5] or [∞], select [Info & Conax.] 2 Touch [5] or [∞], select [Info & Conax.
⁄ • This function is not available unless a card is inserted. • You can change the [Card Level] by touching [2] or [3]. However, you must enter a password when [Enter CA PIN:] appears to change the Card Level setting. • To change the password, enter the current password for [Enter CA PIN:] and new password for [Enter New CA PIN:] and [Confirm new CA PIN:]. English KTC-D500E.indb 17 17 07.7.
Remote Control Unit INFO EPG MUTE POWER SUB TITLE MENU TV/RADIO EXIT LANG TIMER AUDIO PREVIEW A Z AUTO SCAN INFO 5/∞ Current channel info (toggle between pages in menu using 5/∞/2 / 3). a. Changes channels (channel up, channel down). b. Toggles between menu items (up/down). EPG Opens the Electronic Program Guide. POWER Powers the (STB) unit on and off. MUTE Mutes the sound. Volume mute only works in TV/Radio mode (i.e. not when a menu is opened). MENU Press once to enter Main Menu.
Loading battery Page up Use one lithium battery (CR2025). Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. a. TV/radio mode b. Page down 3 Replace the battery LANG TIMER Sleep timer. Press to set different times. RY TT BA BA RY RY TT TT R BA BA TT BA Switches language. 1 Keep on slide AUDIO Audio modes. Switches to teletext. 0–9 a. Selects a channel to watch. Press two numbers one after the other to go beyond 9 (e.g.
List of Accessories 1 Digital TV Tuner............... 1 2 Remote Control Unit ... 1 3 Wiring harness ................. 1 4 Remote Control Receiver .................................1 5 TV Interface Cable ......... 1 6 Bracket .................................. 2 7 Card Slot Cover ............... 1 8 Screw (M3×4mm)............6 9 Screw (ø4×16mm) ........ 4 20 KTC-D500E KTC-D500E.indb 20 07.7.
Installing the Digital TV Tuner The Digital TV Tuner (main unit) can be installed by securing it to the pile carpet with Velcro or by screwing it on to a commercially available audio board. Installing the Main Unit • There are various terminals on the main unit. Leave some space to connect cables on the terminal side of the main unit. • Do not place anything on top of the main unit. This can cause product failure. • Do not install the main unit stacked with other units. • Install the main unit at least 1.
Installing and Connecting the Remote Control Receiver Paste the remote control receiver to the dashboard. 1 Remove the paper from double-stick tape and paste it on the back of the remote control receiver. 2 Wipe the dirt and oil off from the installation area and paste the remote control receiver 6 to the dashboard. 3 Connect the connectors of the remote control receiver to the main unit. Remote control receiver 4 ⁄ • Wipe oil and dirt off from the installation surface.
Inserting Pay Card Insert the Pay Card into the card slot, and attach the card slot cover. Screw (M3×4mm) 8 Card Slot Cover 7 Digital TV Tuner 1 English KTC-D500E.indb 23 23 07.7.
Connection Connect the monitor and power as follows. Set S position when connecting by AV Cable (RCA). Set C position when connecting by Kenwood TV Interface Cable. To AV input of the monitor Î Digital TV Tuner 1 Ground wire (Black) - (To car chassis) C Fuse (5A) Battery wire (Yellow) B Fuse (3A) Ignition wire (Red) A Wiring harness 3 • 75Ω • F connector • For VHF/UHF To the center unit such as a DVD receiver.
Specifications TV tuner Input Frequency VHF : 174 – 230 MHz UHF : 470 – 862 MHz Demodulation Type : QPSK/ 64QAM/ 16QAM Channel Bandwidth : 6/ 7/ 8 MHz FFT Size : 2K and 8K Guard Interval : 1/4, 1/8, 1/16, 1/32 Puncture Rate : 1/2, 2/3, 3/4, 5/6, 7/8 Antenna input : 2-ch Diversity Connector Type : F Type × 2 General Operating Voltage (11 – 16V) : 14.4 V Current Consumption : 860 mA Dimensions (W × H × D) (Main unit) : 215 × 37 × 172.
KTC-D500E.indb 172 07.7.
