User Manual

En-4
|
KTC-HR200
Operations –CD Receiver–
Tuning
Selecting the station.
1 Select HD Radio source
Press the [SRC] button.
Select the "HD Radio"/"HD RADIO" display.
2 Select the HD FM band
Press the [FM] button.
Each time the [FM] button is pressed it switches
between the HF1, HF2, and HF3 bands.
Select the HD AM band
Press the [AM] button.
3 Tune up or down program
Press the [4] or [¢] button.
If the sub channel is available in Digital FM
broadcast when <Tuning Mode> is set to Auto
seek or Manual, the channel can be switched.
Example:
(HD FM band)
Analog FM 1
Digital FM 2Analog FM
Digital FM-1ch 3Analog FM £
Digital FM-2ch 4
Digital FM-8ch 0
Digital FM !
<Tuning Mode> : Auto seek or Manual
<Receive Mode> : Auto mode
[4]
[¢]
During the reception of 1, tune up:
234
During the reception of !, tune down: !0
Using <Receive Mode> the modes can be switched to
digital broadcast automatic switching, analog broadcast
only, or digital broadcast only.
When "Digital" has been set with <Receive Mode>, the
seek time will be longer to allow a check of whether the
transmission is a digital broadcast.
It will take few seconds to receive the digital
broadcasting after selecting the frequency.
When Tune up button is pressed, it will switch to the
next frequency if is it switched before receiving the
Digital broadcasting. (£)
When Tune down button is pressed, it will be received
from Analog broadcasting if the Digital broadcasting has
never been received. (!£)
When <Tuning Mode> is set to "Manual", the frequency
will be switched while pressing [4] or [¢] buttons.
Some of the models have the following displays when
the Main channel and Sub channel are switched.
- "Main"/"Primary"/"PRI": When it is switched to the Main
channel
- "Sub"/"Secondary"/"SEC": When it is switched to Sub
channel
Tuning Mode
Sets the tuning mode.
Press the [AUTO] button.
Each time the button is pressed the Tuning mode
switches as shown below.
B64-4188-0800KTC-HR200.indbEn-4B64-4188-0800KTC-HR200.indbEn-4 08.3.316:58:26PM08.3.316:58:26PM