Owner's Manual
Table Of Contents
Before use
AWARNING
To
prevent injury or fire, take the following
precautions:
•
To
prevent a short circuit, never
put
or leave any
metallic objects (such
as
coins or metal tools) inside
the unit.
Cleaning
the
Unit
If the faceplate
of
this
unit
is
stained, wipe it
wiLh
a
dry soft cloth such
as
a silicon cloth.
If the faceplate
is
stained badly, wipe the stain
off
with
a cloth moistened with neutral cleaner, then wipe it
again with a clean soft dry cloth.
Notes
• If you experience problems during installation,
consult your Kenwood dealer.
• The illustrations
of
the display and the panel
appearing in this manual
are
examples used
to
explain more clearly
how
the controls
are
used.
Therefore,
what
appears on the display
in
the
illustrations may differ from what appears on the
display on
the
actual equipment, and some
of
the
illustrations on the display may be inapplicable.
Control Units
that
can
be Connected
For
the models
to
which this
unit
can
be connected,
consult your Kenwood dealer.
Note that the following restrictions may occur
depending on a control unit
to
be
used.
• The HD Radio cannot be selected
as
a dual zone
source.
How
to
operate the unit
Operations
of
this unit
are
described
in
the instruction
manual
of
a control unit.
For
those not described
in
it,
refer
to
the following <Operations> section.
·
CD
Receiver: <Operations
-CD
Receiver-> page
En-
4
•
KVT-512,
DDX512,
DNX5120,
DNX512EX
: <Operations -DVD monitor
1->
page
En-8
• DDX812,
DDX712,
DNX8120, DNX7120
: <Operations -DVD monitor
2->
page
En-11
Q
G
· FolloWing models
are
Multi key system models. Operations
different from those
of
a standard model may be described
in
the <Operations
-CD
Receiver-> section.
KDC-MP728,
KDC-MP828,
KDC-X789,KDC-X889
•
The
display
of
the capital and small letters may be differed
depending on the model.
English
I
En-3