Owner's Manual
Table Of Contents
Receive
Mode
Sets
the receive mode.
1 Select menu mode using the control unit.
Select the menu item.
Select
the
"Receive
Mode"/
"HDR
mode" display.
2 Open Receive
mode
Press
the
setting button
of
the menu items
in
the control unit for at least 1 second.
3 Set
the
Receive
mode
Switching the setting
of
menu items.
Each
time the button
is
pressed
the
Receive
mode
switches
as
shown below.
Preset
Memory
Putting the frequency and channel
in
the memory.
1 Select
the
band
Press
the [FM] or [AM] button.
2 Select
the
frequency
to
put
in
the
memory
Press
the
[~]
or
[~]
button.
3 Put
the
frequency
and
channel in
the
memory
Press
the desired [1] - [6] button for at least 2
seconds.
The
preset
number display blinks 1 time.
On
each
band,
1 station
can
be
put
in
the memory
on
each
[1
J-
[6J
button.
Digital
Analog
"Digital"
"Analog"
Preset Tuning
Calling up the frequency and channel in the
memory.
4 Exit Receive
mode
Press
the [MENU] button.
S Exit
Menu
mode
1 Select
the
band
Press
the [FM] or [AM] button.
2 Call up
the
frequency
and
channel
Press
the desired
[1]
- [6] button.
~
• "Linking" will be displayed for few seconds until it
is
received.
• If the
Sub
channel
is
not
available, the main channel will
be received.
• When <Receive Mode> (page
En-5)
is
set
to
Digital or
Analog, it cannot be received if the setting
is
differed
form the preset.
English I
En-S