KVT-915DVD TELEVISION WITH DVD RECEIVER INSTRUCTION MANUAL TELEVISION AVEC AMPLI-TUNER LECTEUR DE DVD MODE D’EMPLOI TELEVISOR CON RECEPTOR DVD MANUAL DE INSTRUCCIONES TELEVISOR COM RECEPTOR DVD MANUAL DE INSTRUÇÕES © PRINTED IN JAPAN B64-2602-10/01 (K)(AI)
Contents Before Use ..............................................................4 English About discs ............................................................6 Notes on playing MP3/WMA ................................7 Opening/Closing the Monitor and Power Switch ......................................................8 Removing/Attaching the Protection Panel..........9 KVT-915DVD Basic operation..............................10 Basic Operations of Remote Controller ............
Before Use 2WARNING English To prevent injury and/or fire, take the following precautions: • Ensure that the unit is securely installed. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery or ground wires, make sure to use automotive-grade wires or other wires with an area of 0.75mm2 (AWG18) or more to prevent cable deterioration and damage to the cable coating. • To prevent short circuits, never put or leave any metallic objects (e.g.
About discs Notes on playing MP3/WMA Removing discs • Don’t touch the recording surface of the disc. When removing discs from this unit pull them out horizontally. English Handling discs This unit can play MP3 (MPEG1, 2 Audio Layer 3)/WMA. Note, however, that the MP3/WMA recording media and formats acceptable are limited. When writing MP3/WMA, pay attention to the following restrictions. Discs that can’t be used • Discs that aren’t round can’t be used.
Opening/Closing the Monitor and Power Switch English Open the monitor Removing/Attaching the Protection Panel Remove the protection panel [OPEN/CLOSE] key Close the monitor Attach the protection panel Place the right end of the protection panel onto hooks and push it until clicked and locked. Then, push the left end of the panel to lock it. Turn the power switch on Two hooks [Source] key Hold down the [Source] key more than one second to turn it off.
KVT-915DVD Basic operation 1 Play Disc [Disc insertion slot] ■ When the monitor is open English A disc is played when you insert it. 8 Track/Station Selectors [Up] /[Down] key Selects a music or chapter, track, or frequency. 9 Band/Folder Selectors [FM]/[AM] key 2 Stop to Play [7] key Press the [FM] key to switch to the FM1/2/3 band or the next folder/disc. Press the [AM] key to switch to the AM band or the previous folder/disc. Stops to play. 3 Play/Pause [38] key Pauses and replays a disc.
Basic Operations of Remote Controller 6 Joystick q [DVD] [DISC] Selects an option from the DVD Disc Menu. English Right or left: Selects a chapter, a track or a song. Up or down: Select a folder or a disc. Push: Plays or pauses. DISC BAND TV DVD AUD Right or left: Select a channel. Up: Switches to TV1, TV2, VIDEO1 or VIDEO2. Push: Selects the Seek mode.
Switch Small Display Switch Screen Mode The Small Display screen mode changes each time the [Display] key is pressed. The Screen mode of the monitor changes each time the [MODE] key is pressed. English SCREEN MODE V.SEL S M V FNC V.OFF F AV OUT SEL SCREEN MODE V.SEL S M V DISP AUTO AUTO F AV OUT SEL SRC SRC ATT FNC V.
Control during DVD Video, DVD Audio or Video CD Playback Control during DVD Video, DVD Audio or Video CD Playback English Various control screens appear when you play back a DVD Video (DVD-V), a DVD Displaying the DVD/VCD Playback screen Displaying the Easy Control Panel 1 Title Number Display (DVD-V) Group Number Display (DVD-A) You can use the following operations when displaying DVD/VCD images. Plays back the DVD or VCD. 4 Forward Chapter Search Area (DVD-V) Selects the next chapter.
Control during DVD Video, DVD Audio or Video CD Playback English Displaying the DVD-V/DVD-A/ VCD Control screen o Adjusts the volume. Plays a DVD/VCD using various functions. ; Ejects the disc from the built-in disc player. a Calls the Sound Effects Menu. (see page 86) s Switches the source. Displays the Source Select screen when touched more than one second. (see page 57) DVD/VCD Control screen d Calls the Setup Menu.
Control during DVD Video, DVD Audio or Video CD DVD Disc Menu 2 Select Disc Menu options English Selects an option from the DVD Disc Menu. Disc Menu Playback VCD Zoom Control Direct Search Displays an enlarged VCD screen. You can search for a DVD/VCD chapter, scene or track by entering its number.
TV Control TV Control English Various control screens appear in the TV Source mode. Displaying the TV Picture screen Displaying the TV Control screen Various control screens appear in the TV Source mode. 1 TV Band Number Display t Adjusts the volume. You can tune in a TV station using various functions. y Calls the TV Menu. 2 TV Area Group Display (South American sales only) Selects the TV Pictures. u Calls the Sound Effects Menu.
TV Control English Seek Mode Manual Memory Set Station Name Direct Search Sets a TV station selection. Stores the current receiving channel in memory. Names a station. Tunes in a station when its channel number is entered. SEEK If SEEK is not shown, touch 1 Select a station you wish to name 1 Select a channel you wish to store in memory Next 1 Selects the Direct Search mode TV . DIRECT TV The mode is switched each time you touch the button.
Tuner Control Tuner Control English Various control screens appear in the Tuner Source mode. Displaying the Easy Control Panel Displaying the Tuner Control screen The Tuner Control Panel is displayed in a floating position of the selected picture. 1 Adjusts the volume. 6 Adjusts the volume. You can tune in a station using various functions. 7 Calls the Tuner Menu. 2 Switches the source. 8 Calls the Sound Effects Menu. (see page 86) 3 Switches the band (to AM or FM1/2/3). 9 Switches the source.
Tuner Control English Seek Mode Manual Memory Preset Select Set Station Name Sets a station selection. Stores the current receiving station in memory. Lists and tunes in stations in memory one after the other. Names a station. 1 Select a station you wish to store in memory SEEK FM If SEEK 1 Tune in a station you wish to name 1 Call the Tuner Menu is not shown, touch Next FM AM AM . MENU The mode is switched each time you touch the button.
Tuner Control English Direct Search Traffic Information Search for Program Type Radio Text Tunes in a station when its frequency is entered. When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. A program is tuned when you set its program type. You can display the radio text. 1 Select a band 1 1 Call the Tuner Menu Call the Tuner Menu When the traffic bulletin starts... MENU The Traffic Information screen appears automatically.
CD/MP3/WMA/Disc Changer Play Control CD/MP3/WMA/Disc Changer Play Control English You can call various control screens during CD/MP3/WMA/Disc Changer playback. Displaying the Easy Control Panel 1 Adjusts the volume. The CD/MP3/WMA/Disc Changer Play Control Panel is displayed in a floating position of the selected picture. 2 Switches the source. 3 Stops to play the built-in disc player. 4 When a CD is played back on the built-in disc player: Rewinds or fast forwards.
CD/MP3/WMA/Disc Changer Play Control English MP3/WMA Control screen Disc Changer Control screen During play by the disc changer During MP3/WMA play / Ejects a disc. 32 31 30 33 34 33 45 SRC IN 35 41 Next 36 SCN 37 40 39 38 REP SCRL 1 47 P 00:03:24 44 - FREP - v Plays or pauses. 48 48 Next 51 - - - n Starts or stops Scan Play (that plays the beginning of each song one after the other). m Repeats to play (the present song).
CD/MP3/WMA/Disc Changer Play Control Set Disc Name English Names a CD. 1 Play a CD you wish to name Displaying the CD/MP3/WMA/Disc Changer Menu screen You can select menu options using various functions. 2 Call the CD/Disc Changer Menu Selects options from various function menus. Returns to the CD/MP3/WMA/Disc Changer Control screen. MENU CD Menu screen Select Folder (during MP3/WMA play) The folders of an MP3/WMA disc are listed for quick search.
CD/MP3/WMA/Disc Changer Play Control Mute Telephone English ID3/WMA TAG Display (during MP3/WMA play) Disc Select (during play by disc changer) The ID3/WMA TAG information of MP3/WMA file is listed. The discs loaded on the disc changer are listed for quick disc selection. 1 Call the MP3/WMA Menu 1 Calls the Disc Changer Menu MENU 2 Display the ID3/WMA TAG Direct Search Mute Telephone Searches for a disc or a song when its number is entered.
SIRIUS Tuner Control SIRIUS Tuner Control English Various control screens appear in the SIRIUS Tuner source mode. Displaying the Easy Control Panel Displaying the SIRIUS Tuner Control screen The SIRIUS Tuner Control Panel is displayed in a floating position of the selected picture. 6 Adjusts the volume. 1 Adjusts the volume. 7 Calls the SIRIUS Tuner Menu. 2 Switches the source. 8 Calls the Sound Effects Menu. (see page 86) 3 Switches the band. 9 Switches the source.
SIRIUS Tuner Control Channel Search 3 Select a category English The categories and channels are listed for your channel selection. etc. cat.HITS 0 Direct Channel Search Information Display A channel is tuned when you enter its number. The tuned program information is displayed. 1 Call the SIRIUS Tuner Menu 1 Call the SIRIUS Tuner Menu 1 Call the SIRIUS Tuner Menu The channel list of the selected category appears.
HD Radio Control HD Radio Control English Various control screens appear in the HD Radio Source mode. Displaying the Easy Control Panel Displaying the HD Radio Control screen 1 Adjusts the volume. The HD Radio Control Panel is displayed in a floating position of the selected picture. 6 Adjusts the volume. You can tune in a station using various functions. 7 Calls the HD Radio Menu. 2 Switches the source. 8 Calls the Sound Effects Menu.
HD Radio Control English Seek Mode Manual Memory Receive Mode Title Display Sets a station selection. Stores the current receiving station in memory. The digital or analog program is selected and received. An information about the received song is displayed. 1 Select a station you wish to store in memory SEEK 1 Call the HD Radio Menu HD FM If SEEK is not shown, touch Next 1 Call the HD Radio Menu HD AM . MENU MENU The mode is switched each time you touch the button.
DAB Tuner control DAB Tuner control English Various control screens appear in the DAB Tuner source mode. Displaying the Easy Control Panel 1 Adjusts the volume. The DAB Tuner Control Panel is displayed in a floating position of the selected picture. 2 Switches the source. Displaying the DAB Tuner Control screen 7 Adjusts the volume. You can select the Ensemble and services using various functions. 9 Calls the Sound Effects Menu. (see page 86) 4 Selects a service. p Switches the source.
DAB Tuner control English Seek Mode Service Preset Memory Service Select Language Filter A service selection method can be set. The current receiving service is stored in memory. The service list of the currently receiving ensemble is displayed for your selection. The languages are list for your selection. SEEK If SEEK 1 Select a service you wish to store in memory is not shown, touch Next MENU Band . MENU The mode display is switched each time you touch the button.
DAB Tuner control Search for Program Type Select a Language English The services are received when you set its program type. 1 Call the DAB Tuner Menu Display the Language select screen DAB Information DAB Announcement The DAB information is displayed. When the Announcement you have turned on starts, any source is switched to the Announcement automatically. 1 Call the DAB Tuner Menu LANG When the announcement starts... MENU The Announcement screen appears automatically.
Weather Band Tuner Control Weather Band Tuner Control English Various control screens appear in the Weather Band Tuner source mode. Displaying the Easy Control Panel 1 Adjusts the volume. The Weather Band Tuner Control Panel is displayed in a floating position of the selected picture. 4 Adjusts the volume. 2 Switches the source. 5 Calls the Sound Effects Menu. (see page 86) 3 Tunes in a station. 6 Switches the source. Displays the Source Select screen when touched more than one second.
Character Entry Source Select English How To Use the Character Entry screen Source Select The source you wish to listen to can be selected quickly. When you select the Set Disc Name mode or others, the following screen appears for character entry. Displaying the Control screen Character Entry screen 1 1 2 3 やf - l r ゆ Press this key several times unit the Control screen appears. Control screen つ x よ ' 4 5 OK SRC 1 Shifts the cursor. 2 Enters a space.
Adjusting the Monitor Display Position and Quality Setup Menu English Adjusting the Monitor Display Position and Quality Setup Menu You can adjust the position and picture quality of the monitor. You can set up various receiver parameters. Displaying the Screen Control screen Displaying the Control screen You can adjust the picture quality using the following keys. 1 Brightness Control Disabled if the Auto Dimmer is On. 2 Tint Control Displayed when an NTSC system image is displayed.
Setup Menu Audio Set Up English You can set up the car type and speaker system you use together with this unit. Displaying the Car Type Set Up screen If your vehicle type is selected, the Digital Time Alignment is set automatically (for timing adjustment of sound output for each channel) to have the highest surround effects. Displaying the Speaker Set Up screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source.
Setup Menu Speaker Set Up 2 Select a speaker type English Select a speaker type and its size to get the best sound effects. Channel Level Set the volume at each setup position. 1 Select a speaker you wish to adjust 1 Select a speaker you wish to adjust You can select any of the following speaker types.
Setup Menu DTA Setup 3 Set a delay time English Manually set the sound output timing of each channel. Crossover Network Setup Speaker Setup Memory You can manually set a crossover frequency of speakers. You can store all of speaker and crossover setup in memory simultaneously. 1 Display the DTA Setup screen (P60 6) DTA DTA Setup screen D DTA X'Over The speakers are virtually moved to the desired distance.
Setup Menu DVD Setup English You can set up the DVD play. Displaying the DVD SETUP 1 screen Displaying the DVD SETUP 3 screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. DVD SETUP 4 Calls the Setup Menu. 4 1 Set 3 5 Set 2 1 6 Set DVD SETUP 3 screen 5 Selects a disc menu language.*1 (See , page 68) 6 Selects a subtitle language.*1 (See , page 68) 7 Selects an audio language.
Setup Menu Language Setup English Abbreviation Select a language you use for the speech and menus. 1 Display the Language Setup screen See (see page 66) and select a language you wish to use. Audio Language Set 2 1 4 5 3 1 Enters a language code. 2 Cancels the language setup and returns to the DVD SETUP 1 screen. 3 Clears the language code. 4 Sets the original audio language. (It appears during audio language setup.
Setup Menu System Setup English You can set up the system parameters. Displaying the System 1 screen Displaying the System 2 screen 1 Adjusts the volume. 9 Selects an illumination color of receiver keys. ( Red) "Green": Green "Red": Red 2 Returns to the Control screen of the previous source. System Set Up 3 Calls the Sound Effects Menu. (see page 86) 4 Calls the Setup Menu. System 1 screen 5 Turns the key touch tone On or Off.
Setup Menu AV Interface English You can set audio and visual (AV) interface parameters. Displaying the AV I/F 1 screen Displaying the AV I/F 2 screen 1 Adjusts the volume. p Selects an AV source to be output at the AV OUTPUT port. ( TV) 2 Returns to the Control screen of the previous source. AV Interface 3 Calls the Sound Effects Menu. (see page 86) AV I/F 1 screen 4 1 3 2 5 5 6 6 7 Norma Normal N ma mal 1 7 8 1 AV I/F 2 screen 4 Calls the Setup Menu.
Setup Menu User Interface English You can set up user interface (IF) parameters. Displaying the User I/F 1 screen Displaying the User I/F 3 screen 1 Adjusts the volume. y Turns the information display On or Off when a button is touched on the Source Control screen. ( On) 2 Returns to the Control screen of the previous source. User Interface u Sets a point display when you touch the screen. ( Pattern1) You can select "Pattern1", "Pattern2" or "OFF". 3 Calls the Sound Effects Menu.
Setup Menu Touch Panel Adjust 3 Adjustment English You can adjust the touch panel operations. Adjusts the clock time 1 Display the Touch Panel Adjust screen 1 Display the Clock Screen Touch the center of left lower and right upper when requested. Touch If or is not shown, touch to display it. Touch Next Clock If or Prev. is not shown, touch to display it. Clock Next MENU 4 1 Clock 1 1 3 Set 4 1 3 2 Prev.
Setup Menu Security Code Setup English You can set a security code to protect your receiver system against theft. 1 Enter the correct security code Set When the Security Code function is activated, the code can't be changed and the function can't be released. Note, the Security Code can be set as the 4 digit number of your choice. 0 PassWord Cancel 1 2 3 4 5 6 7 8 9 You must enter the same security code as that you have entered in Step 3 above.
Setup Menu English TV Setup SIRIUS Setup The TV signal receiving areas can be set. You can display the SIRIUS ID. Displaying the TV1 Area Set Up screen Displaying the SIRIUS Set Up screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. TV Set Up 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. SIRIUS Set Up 3 Calls the Sound Effects Menu. (see page 86) 4 Calls the Setup Menu.
Setup Menu English DAB Set Up Announcement Selection The DAB reception can be set. Various announcement reception parameters can be set. Displaying the DAB Set Up screen 3 Terminate the setup Return 1 Displays the Announcement Selection screen 1 Adjusts the volume. Set 2 Calls the Sound Effects Menu. (see page 86) DAB Set Up 3 Returns to the Control screen of the previous source. DAB Set Up screen 2 Off 1 4 Calls the Setup Menu. 5 Turns the DAB Priority On or Off.
Setup Menu English Sensor AMP Control You can set up the optional KPA-SS100 Sensor Box. Sets the power amp connected via the LX bus. Displaying the Sensor Box screen Displaying the AMP Control screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Sensor 1 Adjusts the volume. 2 Calls the Setup Menu. 3 Calls the Sound Effects Menu. (see page 86) 3 Calls the Sound Effects Menu. (see page 86) 4 Selects menu options. Sensor Box screen 5 Enters your setup.
Sound Effects Menu English Sound Effects Menu Audio Control You can set up the receiver sound effects. You can adjust the front and rear and right and left audio balance. Displaying the Control screen Displaying the Audio Control screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Audio Control Control screen 3 Calls the Setup Menu. (see page 59) Audio Control screen 4 Calls the Sound Effects Menu. 5 Adjusts the right and left volume balance.
Sound Effects Menu English SFC SFC Adjustment You can set up the sound field. You can adjust the sound field. 2 Adjust the sound field 1 Display the SFC Adjustment screen Displaying the SFC screen 3 Exit the sound field adjustment 1 Adjusts the volume. Adjust 2 Returns to the Control screen of the previous source. SFC 3 Calls the Setup Menu. (see page 59) SFC screen Return SFC Adjust screen 4 Calls the Sound Effects Menu.
Sound Effects Menu English Equalizer Parametric Equalizer You can set up the equalizer. You can Manually set the equalizer curve by adjusting the center frequency, gain and Q value. Displaying the Equalizer screen 5 Set a Q value Q- 1 Display the Parametric Equalizer screen Store or call the equalizer curve into/from memory 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Equalizer Q+ To store the equalizer curve in memory: P-EQ 3 Calls the Setup Menu.
Sound Effects Menu English Position Position Fine Control You can adjust the sound effects according to your listening position. You can fine-adjust your listening position. 3 Set a delay time 1 Display the Position Fine Control screen Displaying the Position screen Store or call your adjustment into/from memory 1 Adjusts the volume. Adjust 2 Returns to the Control screen of the previous source. Position 3 Calls the Setup Menu. (see page 59) 4 Calls the Sound Effects Menu.
Sound Effects Menu Zone Control English You can set the front and rear audio source. Displaying the Zone Control screen 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. Zone Control 3 Calls the Setup Menu. (see page 59) 4 Calls the Sound Effects Menu. Zone Control screen 5 4 1 6 Rear 6 1 5 Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off. When turned On, Front and Rear are shown.
Before Installation Accessories Installation Procedure English 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 9 1 ..........4 ..........1 2. Make the proper input and output wire connections for each unit. 3. Connect the speaker wires of the wiring harness. 2 4. Connect the wiring harness wires in the following order: ground, battery, ignition. 0 5. Connect the wiring harness connector to the unit. ..........2 ..........1 6.
Connection (Black) 2WARNING Center Speaker + (Black/White) (Pink) To vehicle’s reverse lamp harness Connect to the vehicle's parking brake detection switch harness using the supplied relay connector. CENTER REVERSE 2CAUTION For the sake of safety, be sure to connect the parking sensor.
Connection Installation Connection for AV Equipments Installation for Monitor/Player Unit English Firewall or metal support PREOUT VIDEO AV INPUT 1 L R AV OUTPUT VIDEO L VIDEO AV INPUT 2 L R R FM /AM ANTENNA SUB (MONO) L REAR L FRONT L R R R Screw (M4X8) (commercially available) POWER CENTER Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
Installation ■ Installation on Toyota Car using Brackets at Holes shown by "¶" Installing in Japanese-Made Cars English ■ Installation on Toyota, Nissan or Mitsubishi Car using Brackets at Holes shown by "¶" or When using the bracket shown above, you cannot use screws at two holes of the right and left unit sides. If so, tighten the bracket using accessories ~ as shown below. or 1. Use accessories ~ at both sides as shown.
Installation Installing the Antenna Units Removing Monitor/Player Unit English ¶ Attach the antenna to the inner glass surface of the rear window using double-sided tape. Carefully check the ■ Removing the Hard Rubber Frame (escutcheon) installation location as the tape can only be stuck on once. ¶ If the surface temperature of the glass of the rear window is low, warm it by turning on the power of the rear defogger.
Glossary DVD: Digital Versatile Disc English A type of disc which contains recording of audio/video packaged media with high video and audio quality, such as a movie, featuring large recording capacity and digital signal processing capability. VCD: VIDEO CD A type of CD which contains the recording of moving images. It compresses image information by about 1/120 and audio information by about 1/6 and accommodates up to 74 minutes of recording in a disc with the same diameter as ordinary music CD of 12 cm.
Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. English • Attenuator is turned on. • The fader or balance settings are set all the way to one side. • The input/output wires or wiring harness are connected incorrectly. ■ General The power does not turn on. • The fuse has blown.
Troubleshooting Guide The viewing angle cannot be changed. English • The DVD disc being played does not contain the recording of more than one angle. • You are attempting to switch the angle in a DVD section where more than one angle is not recorded. ■ MP3/WMA source • The viewing angle cannot be changed when the DVD disc being played does not contain the recording of more than one angle. • More than one viewing angle may be recorded only in limited sections in a disc.
Specifications 2CAUTION Specifications subject to change without notice. English Monitor Section Picture size ..........................................6.95 inches (diagonal) wide 154.1(W)×87.1(H)mm Display system......................................Transparent TN LCD panel Drive system ..........................................TFT active matrix system Number of pixels ................................336,960 (480H×234V×RGB) Effective pixels ...............................................................