KVT-M700(K)_Eng_ver01.1 01.12.20 7:19 PM Page 1 7-Inch WIDE SCREEN MONITOR-RECEIVER KVT-M700 INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new monitor-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:19 PM Page 2 Contents Before Use ............................................................4 • Safety Precautions • About RDS Monitor Control Function....................................
KVT-M700(K)_Eng_ver01.1 01.12.20 7:19 PM Page 3 AV Control Function ..........................................23 • Selecting the On Screen Control • Selecting the Preset Band TV1 and TV2 • Selecting the Video Input • Seek Mode • Selecting the Channel • Station Preset Memory • Auto Memory Entry • Recalling a Preset Station • Switching to the TV List Screen • Switching to the Name Set Screen • TV List Screen CD Player Control Function...............................
KVT-M700(K)_Eng_ver01.1 01.12.20 7:19 PM Page 4 Before Use Safety Precautions Cleaning the Unit 2WARNING To prevent injury and/or fire, take the following precautions: • Ensure that the unit is securely installed. Otherwise it may fly out of place during collisions and other jolts. • When extending the ignition, battery or ground wires, make sure to use automotive-grade wires or other cables with an area of 0.75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:19 PM Page 5 Monitor Control Function Opening the Monitor 1 Set the vehicle’s parking brake. 2 Press the [OPEN] button. The monitor will open. OPEN • The gear shift lever or other parts may interfere with the monitor when it opens. If so, move the gear shift lever (being sure to do so safely) before operating the set. (The monitor is drawn back in automatically if it cannot be opened normally due to an obstacle.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:19 PM Page 6 Monitor Control Function Switching the TV/Video Screen Mode Press the [MODE] button. Each time the button is pressed the screen mode switches as follows: Display Setting "FULL" Full screen mode "ZOOM" Zoom screen mode "JUST" Just screen mode "CINEMA" Cinema screen mode "NORMAL" Normal screen mode You cannot operate when the navigation picture is displayed. Switching the AV Output FNC V.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:19 PM Page 7 Angle Control Screen A NG L E Screen Control Screen SCREEN CTRL CTRL A NG L E SCREEN BRT A NG L E T I N CO L S L I DE ON D I M OFF CON T AUTO OPEN - C LOSE O N OF F B L K D I M OK Adjusting the Angle Position [ANGLE] The monitor slants back one step: Touch the [ 3 ] button. The monitor slants forward one step: Touch the [ 2 ] button. Adjusting the Picture Quality Item BRT TIN COL CONT • The angle can be adjusted in 9 steps.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:19 PM Page 8 Menu Function On Screen Control Menu Screen ME NU SOUND SRC AM FM3 P 1 1 0 8 . 5 FM - I NFO P 1 P 2 P 3 P 4 P 5 FM M Hz SETUP 1 2:0 0 TUNER T OUCH AV C L OC K S Y S T EM I / F COD E P 6 SOURC E Selecting the Menu Screen 1 FNC Displaying the On Screen Control Press the [FNC] button to display the on screen control. If you make no button operation for 10 seconds, the on screen control is automatically cancelled.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:19 PM Page 9 Setup Function Setup Menu Screen ME NU SOUND SETUP 1 2:0 0 Clock Adjustment Screen C L O C K TUNER T OUCH AV C L OC K S Y S T EM I / F COD E SOURC E Selecting the Touch Panel Adjustment Screen The touch panel can be adjusted if the position touched and the operation performed do not match. Touch the [TOUCH] button. (☛ Page 10) Selecting the AV Setup Screen Touch the [AV I/F] button.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:19 PM Page 10 Setup Function Code Security Screen # # # # Touch Panel Adjustment Screen 1 s t 1 2 3 4 5 6 7 8 9 0 CLR SECUR I T Y T O U C H P t t R RTN When the Security Code function is activated, the code can't be changed and the function can't be released. Note, the Security Code can be set as the 4 digit number of your choice. Enter the Security Code Touch the [0] — [9] button. If you enter the wrong number, touch [CLR].
KVT-M700(K)_Eng_ver01.1 01.12.20 7:19 PM Page 11 AV Setup Screen A V - I N 1 VD NAV A V - I N 2 VD AUTO VD OF F VD R G B - I N ON OF F A V - O U T AV 1 AV AV 2 1 2 NAV T I / F V RTN Setting the AV IN-1 Mode [AV-IN1] Touch [7NAV] [7VD] Setting It becomes the navigation mode setting. Operate the V.SEL button when the image from the navigation unit connected to AV IN1 terminal is shown on the monitor. It becomes the video mode setting.Operate the V.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:19 PM Page 12 System Setup Function System Setup Screen-1 B E E P O N A U T O O O N N System Setup Screen-2 K E Y OF F I L L UM I GR E E N K E Y S C R E E N OF F I N D I C A T O R SOURC E N A V O D S I O N OF F S Y S T EM N A V RTN Touch Sensor Tone [BEEP] Setting the operation check sound (beep sound) ON/OFF.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:19 PM Page 13 Exit the System Setup Screen Touch the [RTN] button. Return to the setup menu screen.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 14 Sound Control Function Sound Control Menu Screen ME NU SOUND TUNER SYS BA L / FAD F SE L O F F AMP BASS F L T AMP FREQ NM L E s L SP L OUD O N 1 2:0 0 SETUP AUD I O Audio Setting Screen-1 R T ON E R SOURC E Selecting the Audio Setting Screen Touch the [AUDIO] button.(☛ Page 14) You cannot operate when the standby mode is selected. Selecting the System Es Setting Screen Touch the [SYS Es] button.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 15 Audio Setting Screen-2 S Y S T EM Q TOP 4 0 S Y S T EM O N QE x O F F 2 Z ON E O N O F F AUD I O RTN Dual Zone System [2 ZONE] The following operation allows separate sound sources to control the output of the front and rear speakers. Touch [7ON] [7OFF] Setting The dual zone system function is on. AV-OUT sound send to the rear speaker. The dual zone system function is off.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 16 Sound Control Function Speaker Select Screen Tone Control Screen (Ex:OFF) BASS SPEAKER 6 * 9 / 6 i n c h WO O F E R 1 2 i n SP M I D L EVE L 2 TRE L EVE L 1 t y p e A SE L RTN Speaker & Woofer Setting Fine-tuning so that the System Q value is optimal when setting the speaker and woofer type. Touch the [2] or [3] button.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 17 Tone Control Screen -1 (Ex:ON) BASS f 1 5 0 BASS BASS EXT O N O F F L EVE L 1 System Es Setting Screen HPF F 1 2 0 L PF N - F 8 0 HPF R 1 2 0 N - F L EVE L 0 0 N - F PHASE NORMA L BASS Q 2 . 0 0 T ON E RTN S Y S T EM REVERSE E s RTN Tone Control Screen -2 (Ex:ON) System Es M I D f 1 2 0 TRE f 1 7 . 5 M I D TRE L EVE L 1 L EVE L 1 M I D Q 2 . 0 0 T ON E RTN Touch the [2] or [3] button.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 18 Source Control Function (Common operation) Source Control Screen On Screen Control T I ME NU 1 2:0 0 TUNER FM3 P 1 FM - I NFO ATT SRC AM FM3 P 1 1 0 8 . 5 FM - I NFO P 1 P 2 P 3 P 4 P 5 LOUD LIST AM FM M Hz M Hz 9 2 . 5 FM INFO P 6 PTY P 1 P 2 P 3 P 4 P 5 P 6 Attenuator FNC SRC MODE AM ATT 4 ¢ FM Turning the volume down quickly. Press the [ATT] button. Each time the button is pressed the Attenuator turns ON or OFF.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 19 TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 20 FM/AM Tuner Control Function Control Screen -1 On Screen Control T I ME NU 1 2:0 0 TUNER FM3 P 1 FM - I NFO M Hz 9 2 . 5 MANU CRSC SRC AM FM3 P 1 1 0 8 . 5 FM - I NFO P 1 P 2 P 3 P 4 P 5 LIST AM FM M Hz TI ST RDS FM INFO P 6 PTY P 1 P 2 P 3 P 4 P 5 P 6 Auto Memory Entry AM 4 ¢ Putting stations with good reception in the memory automatically. FM Selecting the FM Band Press/ touch the [FM] button.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 21 Control Screen -2 T I ME NU 1 2:0 0 TUNER FM3 P 1 FM - I NFO 1 0 8 . 5 M Hz MANU CRSC TI ST RDS LIST AM FM INFO PTY AME SEEK NAME CRSC DISP Traffic Information Switching to the FM/AM List Screen Switching to traffic information automatically when a traffic bulletin starts even when you aren't listening to the radio. Touch the [TI] button. Each time the button is touched the Traffic Information function turns ON or OFF.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 22 FM/AM Tuner Control Function FM/AM List Screen FM1 P 1 9 2 . 5 PTY Search Screen FM - J J T o p 4 0 M Hz 1 SNPS # # # # # # # # DISP 2 SNPS # # # # # # # # FM 3 SNPS # # # # # # # # AM P T Y New s U S E R P T Y New s SET 4 SNPS # # # # # # # # 5 SNPS # # # # # # # # 6 SNPS # # # # # # # # RTN FM/AM List Screen Selecting the FM band Touch the [FM] button. Each time the button is touched it switches between the FM1, FM2, and FM3 bands.
KVT-M700(K)_Eng_ver01.1 01.12.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 24 AV Control Function Control Screen-1 T I ME NU A TV List Screen 1 2:0 0 TV 1 V P 1 1 2 c h 1 I NFO - TV TV 1 P 1 NO N AME 1 2 c h 2 TV - J APAN MANU 3 AV TV 3 c h 4 1 0 c h TV 5 1 1 c h P 1 P 2 P 3 P 4 P 5 6 1 2 c h P 6 RTN Control Screen-2 T I ME NU A TV List Screen 1 2:0 0 Selecting the TV preset band Touch the [TV] button. Each time the button is touched it switches between the TV1, and TV2 bands.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 25 CD Player Control Function On Screen Control Control Screen-1 T I ME NU C 1 2:0 0 D Track 1 2 1 2 : 3 4 DNPS # # # # # # # # # # # # REP SRC Track 1 2 1 2 : 3 4 DNPS # # # # # # # # # # # # SCN REP RDM SCN REP RDM Control Screen-2 T I ME NU C 4 ¢ 1 2:0 0 D Track 1 2 1 2 : 3 4 DNPS # # # # # # # # # # # # REP Pause and play Touch the [38] button. Each time the button is touched it pauses and plays.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 26 Disc Changer Control Function On Screen Control Control Screen-1 T I ME NU 1 2:0 0 D I SC - CH Disc 5 - Track 1 2 2 : 3 4 D I SCTEXT # # # # REP SRC D - D– D+ 1 2 2 : 3 4 Disc 5 - Track D I SCTEXT # # # # SCN DREP REP MRDM RDM D+ SCN DREP REP MRDM RDM Album Repeat AM 4 ¢ FM Pause and play Replaying the disc in the Disc changer you're listening to. Touch the [DREP] button. Each time the button is pressed Album Repeat turns ON or OFF.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 27 Control Screen-2 T I ME NU Disc List Screen 1 2:0 0 D I SC - CH 1 Disc 5 - Track 1 2 2 : 3 4 D I SCTEXT # # # # REP D - D+ LIST INFO NAME DISP D - TEXT L I ST Disc 5 - Track 1 2 1 2 : 3 4 1 B e s t H i t - V 1 2 B e s t H i t - V 2 3 NO TEXT 4 NO TEXT 5 NO TEXT 6 NO TEXT DISP RTN Disc List Screen Switching Display Touch the [DISP] button. Each time the button is touched the display switches as shown below.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 28 Name Set Function Name Set Screen N AME # P R E S E T # A B C D E F A B G H I J K L M N O P Q R S T U V W X Y Z , . • - a b S P C 1 2 Ä ä N AME SET O K Station Name Preset (SNPS)/ Disc Name Preset (DNPS) 1 Move the cursor to the enter character position Touch the [<] or [>] button. 2 Select the character type Touch the [AB], [ab], [12] or [Ää] button. 3 Select the character list Touch the [∞] or [5] button.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 29 Other Option Control Function 7 Weather Band Tuner Control Control Screen On Screen Control T I ME NU W B WB T - 0 1 1 2:0 0 T 1 6 2 . 4 7 5 M Hz SRC WB T - 0 1 1 6 2 . 4 7 5 M Hz 4 ¢ Selecting the Channels Press the [4] or [¢] button. Touch the [4] or [¢] button.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 30 Other Option Control Function 7 SIRIUS Tuner Control On Screen Control Control Screen-1 ME NU 1 2:0 0 S I R I US S I R1 P 1 2 1 c h CH A NN E L # N AME # # # # SEEK1 SCN SRC BAND S I R1 P 1 3 2 1 c h # # # # # # # # # # # # # # # # P 1 P 2 P 3 P 4 P 5 P 6 BAND SRCH INFO P 1 P 2 P 3 P 4 P 5 P 6 Seek Mode 4 ¢ FM Selecting the Preset Band Press the [FM] button.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 31 Control Screen-2 ME NU 1 2:0 0 S I R I US S I R1 P 1 2 1 c h CH A NN E L # N AME # # # # SEEK1 SCN BAND INFO SRCH SCN SEEK 2 Page Up/Down for the Category Touch the [5] or [∞] button. 3 Select the Category Touch the list. The channel select screen is displayed.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 32 Other Option Control Function 7 External Display Control 7 Sensor Box Control External Display Control Screen 1 2:0 0 Sensor Box Control Screen 1 2:0 0 S E N SOR NOR T H . D I R . 8 EXT . D I SP L AY AD J UST RTN RTN Switching the Display Setting the Menu Touch the [2] or [3] button.
KVT-M700(K)_Eng_ver01.1 01.12.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 34 Remote Control Function Monitor Control Function 38 38 FM+ AM– SRC SRC FM 4 TUNE TRACK DISC AM ¢ 4 ¢ + – ATT ATT V.SEL AV OUT DIRECT OK ABC DEF V.SEL 1 2 3 GHI JKL MNO 4 5 6 PRS TUV WXY 7 9 9 DIRECT/OK AV OUT 3 Switching the Monitor’s Picture Press the [V.SEL] button. Each time the button is pressed the monitor’s picture switches. 3 Switching the AV Output Mode Press the [AV OUT] button.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 35 AV Control Function 3 Selecting the TV band SIRIUS Tuner Control Function Press the [FM+] button. Each time the button is pressed the preset band switches between the TV1 and TV2. This function available during the KTC-V500N is connected. 3 Selecting the Preset Band Press the [FM+] button. Each time the button is pressed it switches between the SIR1, SIR2, SIR3 and SIR4 preset bands.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 36 Installation Accessories The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. H D A I E B J F C K G L Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the · terminal of the battery. 2. Make the proper input and output cable connections for each unit. 3.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 37 Installation for Monitor Unit When mounting the main unit after checking the operation, close the monitor first. Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction. Firewall or metal support Metal mounting strap (commercially available) Screw (M4X6) (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 38 Installation ■ Installing in Japanese-Made Cars-2 When the vehicle bracket is attached as in Toyota vehicles that use a hole in the ● position in the figure below. Not use the Hard Rubber Frame (Accessory E). or If this device can’t be fastened with screws in the 2 places on the right and left due to the vehicle bracket shape, use the installation fastener (Accessory J) and fasten the bracket.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 39 Installation for Receiver unit ■ Securing to audio board 1 Attach the installation brackets to the sides of the 2 Use the tapping screw (ø4 × 16 mm) to hideaway unit using the sems bolts (M4 × 8 mm). Sems bolts (M4 × 8 mm) (Accessory F) secure the hideaway unit to the audio board. (ø4 × 16 mm) (Accessory G) Installation brackets (Accessory H) Do not install the receiver unit under the carpet. Otherwise heat buildup occurs and the unit may be damaged.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 40 Installation Connection 2WARNING If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. Monitor Unit (Rear side) When detaching the connection cable, use the accessory tool (Accessory-L) as shown in the diagram.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 41 Remove the protective sheet on the black connector before the KTC-V500N is connected.
KVT-M700(K)_Eng_ver01.1 01.12.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 43 Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON.01 ✔ The fuse has blown. ☞ After checking for short circuits in the wires, replace the fuse with one with the same rating. ? No sound can be heard, or the volume is low.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 44 Troubleshooting Guide Disc source ? "AUX" is displayed without achieving External disc control mode.50 ✔ O-N switch is set to "O" side. ☞ Set the switch to "N" side. ✔ Unsupported disc changer is connected.51 ☞ Connect the supported disc changer. (page 4) ? The specified disc does not play, but another one plays instead.52 ✔ The specified CD is quite dirty. ☞ Clean the CD. ✔ The CD is upside-down.53 ☞ Load the CD with the labeled side up.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 45 The following messages are displayed when certain problems are occurring in your system. Take the recommended actions. EJECT: NO DISC: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.E01 ➪ Load the disc magazine properly. No CD in the unit. ➪ Insert the CD. WAITING: Radio text data is being received.E56 LOAD: Discs are being exchanged in the Disc changer.
KVT-M700(K)_Eng_ver01.1 01.12.20 7:20 PM Page 46 Specifications Specifications subject to change without notice. Monitor Section Picture size ..............................................................7.0 inches wide (154.1 mm x 87.0 mm) Display system ............................................................................Transparent TN LCD panel Drive system..................................................................................TFT active matrix system Number of pixels ...............
KVT-M700(K)_Eng_ver01.1 01.12.
KVT-M700(K)_Eng_ver01.1 01.12.