7-Inch WIDE SCREEN MONITOR-RECEIVER KVT-M707 INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new Monitor-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Contents Before Use .................................................... 4 Opening/Closing the Monitor and Power Switch ....................................................... 6 Removing/Attaching the Protection Panel 7 KVT-M707 Basic operations ........................ 8 Basic Operations of Remote Controller ... 10 Switch Screen Mode .................................. 12 Muting Audio Volume upon Reception of Phone call ............................................... 13 Tuner Control .......................
Setup Menu Setup Menu ............................................................46 Displaying the Control screen Displaying the Setup Menu screen Audio Set Up ..........................................................47 Displaying the Audio Set Up screen Crossover Network Setup System Setup .........................................................50 Displaying the System Set Up 1 screen Displaying the System Set Up 2 screen AV Interface ............................................................
Before Use 2WARNING NOTE To prevent injury or fire, take the following precautions: • If you experience problems during installation, consult your Kenwood dealer. • If the unit fails to operate properly, press the Reset button to restore factory settings. • To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.
Loading and Replacing the battery 1. Use two "R03"/ "AAA"-size batteries. Slide the cover while pressing downwards to remove it as illustrated. 2. Insert the batteries with the + and – poles aligned properly, following the illustration inside the case. Explanation of icons used on this manual Indicates the key operation on the receiver. Indicates the button you must touch. Indicates the key or joystick operation on the remote controller. The initial value of each setup is shown.
Opening/Closing the Monitor and Power Switch Open the monitor [OPEN/CLOSE] key Close the monitor Turn the power on Hold down the [SRC] key more than one second to turn it off. [SRC] key • Do not touch the moving components when you are opening or closing the monitor. If you touch the moving components, you may be hurt or the equipment may be damaged. • Do not try to open or close the monitor by hand.
Removing/Attaching the Protection Panel Remove the protection panel Attach the protection panel Place the right end of the protection panel onto hooks and push it until clicked and locked. Then, push the left end of the panel to lock it. Two hooks • Close the monitor first, then remove or attach the protection panel. • After you have removed the protection panel, you cannot operate the receiver. • After you have removed the protection panel, you can flash the burglar alarm lamp (see page 56).
KVT-M707 Basic operations ■ When the monitor is open ■ When the monitor is closed 8 | English
1 Play/Pause [38] key Pauses and replays a disc. 5 Track/Station Selectors [4]/[¢] key Selects a music, chapter, track, or frequency. 2 Video Source Selection [V.SEL] key Video source selection changes in the following order each time you press the key. 6 Band/Folder Selectors [FM]/[AM] key [FM] key switches to the FM1/2/3 band or next folder/ disc. [AM] key switches to the AM band or previous folder/ disc. 7 Attenuator [ATT] key Attenuates the volume. Press it again to cancel muting.
Basic Operations of Remote Controller 2 NAV 14 18 ENTER AUD CANCEL MENU ZOOM OUT – TV 15 38 BAND+ u ATT 4 ¢ VOL 7 ZOOM IN POSITION – ZOOM OUT ¢ d CANCEL MENU 6 VOL ENTER AUD BAND+ u ATT 4 4 SR C SR C TV 5 L SE V. 1 L SE V. 3 NAV d ZOOM IN POSITION 8 38 17 MODE 9 12 ROUTEM VIEW SC1 16 1 .
5 [V.SEL] key Video source selection changes in the following order each time you press the key. q [OPEN] key TUNER TV DISC Opens or closes the monitor each time you press the key. NAV Jumps to the function registered in Shortcut 2. Video/ TV* w [2-ZONE] key Rear view camera* TUNER Navigation* Turns Zone function on or off each time you press the key. (see page 66 for the ) *Optional accessory Plays Voice guidance. TUNER +: Switches to the FM1, FM2, or FM3 band.
Switching Screen Mode The Screen mode of the monitor changes each time the [MODE] key is pressed. Full picture mode (FULL) Justify picture mode (JUST) Zoom picture mode (ZOOM) Normal picture mode (NORMAL) • When you select the Menu, Easy Control screen, or Navigation, the display is shown in the full-size display mode automatically. The screen mode of these displays cannot be changed. • You can set the screen mode for each of the TV and video images.
Muting Audio Volume upon Reception of Phone call Muting Audio Volume upon Reception of Phone call When the telephone is called, the system is paused automatically. When the telephone is called... The Phone Call ("CALL") screen appears, and the system automatically attenuates the audio volume. Phone Call ("CALL") screen CALL 13:50 If you want to continue to listen to the audio source during phone call... The system resumes audio play during the phone call. When the call ends... Hang up the phone.
Tuner Control Various control screens appear in the Tuner Source mode. Displaying the Easy Control Panel 1 2 3 4 5 The Tuner Control Panel is displayed in a floating position of the selected picture. Adjusts the volume. Switches the source. Switches the band (to AM or FM1/2/3). Tunes in a station. Switches the Seek mode. (see page 16 for the ) Displaying the Easy Control Panel 1 MODE:FULL AV-OUT:AV-IN1 2 SRC TUNER FM1 3 3 4 A M F M Preset 1 4 1 5 SEEK 98.
a When 1 to 6 buttons appear, you can recall the stations on memory. For memory of broadcasting stations, see (see page 16) or (see page 16). s Indicates current Seek mode. Displaying the Tuner Menu screen You can select menu options using various functions. d Selects option from various function menus. f Returns to the Tuner Control screen. • The available functions vary depending on the model used (the tuner specifications and the broadcasting system that can be received).
Seek Mode Manual Memory Sets a station selection. Stores the current receiving station in memory. 1 Select a station you wish to store in memory SEEK AM If SEEK is not shown, touch N e x t . The mode is switched in following order each time you touch the button. 2 Store in memory 2sec. AUTO1 Tunes in a station with good reception automatically. AUTO2 Tunes in stations in memory one after another. MANU Switches to the next channel manually.
Tuner Control Preset Select Set Station Name Lists and tunes in stations in memory one after the other. Names a station. 1 1 Tune in a station you wish to name Call the Tuner Menu AM Me n u 2 2 Call the Tuner Menu Call the Preset Select Menu Me n u Preset Select 1 TUNER 4 5 3 FM1 2) 90.1 MHz Name Set DISP 2 2 FM1 3) 98.1 MHz FM1 4) 106.1 MHz 4 FM1 5) 108.0 MHz 3 FM 98.1 Select the Set Name mode FM1 1) 87.5 MHz For character entry details, see (see page 43).
Direct Search Traffic Information Tunes in a station when its frequency is entered. When a traffic bulletin starts, any source is switched to the traffic information and it is displayed automatically. 1 Select a band – 2 BAND+ When the traffic bulletin starts... Select the Direct Search mode The Traffic Information screen appears automatically.
Tuner Control Search for Program Type Radio Text A program is tuned when you set its program type. You can display the radio text. 1 1 Call the Tuner Menu Me n u Me n u 2 2 Call the PTY Search Menu T U N2E R All Speech 1 News 2 Current Affairs 3 SRCH FM 98.1 Information Not Found USER 4 1 Selects a program type. 2 Scrolls the program type list. 3 Searches for the program type. It is displayed when the Program Type is selected.
Disc Changer/CD player Control You can recall various control screens during Disc Changer/CD player playback. (with the optional accessory Disc Changer or CD player connected only) Displaying the Easy Control Panel 1 2 3 4 5 The Disc Changer/CD player Control Panel is displayed in a floating position of the selected picture. Displaying the Easy Control Panel During playback on disc change 1 TV1 MODE:FULL AV-OUT:AV-IN1 2 5 SRC CD CH D1 5 D – D + T3 3 3 Adjusts the volume. Switches the source.
y Selects the Disc Name (see page 22 for the ), Disc Text, or Track Text mode for text display. u Scrolls the display text. i Switches the play time display between Track, Disc, and Disc Remaining Time. o Shows Disc Number. (Function of Disc Changer) ; Shows Track Number. a Shows Play Time. s Shows current playback function. • The functions that can be used and the information that can be displayed will differ depending on the models being connected.
Set Disc Name Names a CD. 1 2 Play a CD you wish to name Call the CD/Disc Changer Menu Disc Select (during play by disc changer) The discs loaded on the disc changer are listed for quick disc selection. 1 Me n u 3 Select the Set Name mode Call the Disc Changer Menu Me n u 2 Name Set Call the Disc Select Menu Disc Select CD-CH • The Name Set position varies depending on the disc you are playing. 4 2 3. Disc Name 4. Disc Name 3 P 2:35 Exit the Set Name mode 5. Disc Name 6.
Disc Changer/CD player Control Direct Search Searches for a disc or a track when its number is entered. 1 Enter a disc or track number 0 2 — 9 WXYZ Search When searching for a track: 4 ¢ When searching for a disc: – BAND+ • The operation ends automatically if you do not operate within 10 seconds.
TV/ Video Control Various control screens appear in the TV/ Video Source mode. (You can only operate TV with the optional accessory TV Tuner connected.) Displaying the TV Picture screen 1 2 3 4 Various control screens appear in the TV Source mode. Select the TV Pictures. TV Picture screen TV1 3 2ch 2 Preset 1 MODE:FULL AV-OUT:AV-IN1 1 5 4 6 TV Band Number Display Memory Number Display Channel Number Display Channel Up Area Increase the channel. 5 Channel Down Area Decrease the channel.
Displaying the TV Control screen You can tune in a TV station using various functions. TV Control screen 14 14 T V 15 VIDEO 16 21 18 21 17 Next 22 13:50 19 20 TV – AME TV1 14 23 24 – SEEK 27 P r e s e t 1 AUTO1 1 2 r t y u i o ; a 3 s – – d 2ch 14 26 4 5 6 25 f g h j Displaying the TV Menu screen Adjusts the volume. Calls the TV Menu. Calls the Sound Effects Menu. (see page 62) Displays the Source Select screen. (see page 44) Calls the Setup Menu.
Seek Mode Manual Memory Sets a station selection. Stores the current receiving channel in memory. 1 Select a channel you wish to store in memory SEEK TV If SEEK is not shown, touch N e x t . The mode is switched each time you touch the button. 2 Store in memory 2sec. AUTO1 Tunes in a station with good reception automatically. AUTO2 Tunes in stations in memory one after another. MANU Switches to the next channel manually. 1 2sec. — 6 If 1 to 6 are not shown, touch N e x t .
TV Control Set Station Name Direct Search Names a station. Tunes in a station when its channel number is entered. 1 Select a station you wish to name 1 Select the Direct Search mode TV # BS DIRECT 2 Call the TV Menu 2 Me n u Enter a channel number (Page 25 t) 0 3 When you enter a channel number, signal reception starts. Example: When you receive Channel 06 0 6 MNO Enter a name For character entry details, see (see page 43).
SIRIUS Tuner Control Various control screens appear in the SIRIUS Tuner source mode. (with the optional accessory SIRIUS Tuner connected only) Displaying the Easy Control Panel 1 2 3 4 5 The SIRIUS Tuner Control Panel is displayed in a floating position of the selected picture. Displaying the Easy Control Panel 1 Adjusts the volume. Switches the source. Switches the band. Tunes in a station. Switches the Seek mode. SEEK 1: Tunes channels one after the other.
i When 1 to 6 buttons appear, you can recall the channel on memory. For memory of channel stations, see (see page 30) . o Seek Mode Indicator Displaying the SIRIUS Tuner Menu ; Selects options from various function menus. a Returns to the SIRIUS Tuner Control screen. You can select menu options using various functions. Me n u • For SIRIUS Tuner function details, see the Instruction Manual of SIRIUS Satellite Radio Tuner (optional accessory).
Channel Search 3 The categories and channels are listed for your channel selection. 1 etc. CAT. Pop Call the SIRIUS Tuner Menu The channel list of the selected category appears. Channel Selection screen Me n u 2 Select a category SIRIUS 4 Start Channel Searching CH.SIRIUS HITS 1 CH.STARLITE 2 Channel Search 1 CH.SIRIUS LOVE CH.MOVIN' EASY 2 CH.SIRIUS GOLD The category list appears. 3 Re t u r n 16CH 1234567 Category Selection screen SIRIUS 3 1 Tunes in a channel. 2 Scrolls the list.
SIRIUS Tuner Control Direct Channel Search Information Display A channel is tuned when you enter its number. The tuned program information is displayed.
HD Radio Control Various control screens appear in the HD Radio Source mode. (with the optional accessory HD Radio tuner connected only) Displaying the Easy Control Panel 1 2 3 4 5 The HD Radio Control Panel is displayed in a floating position of the selected picture. Adjusts the volume. Switches the source. Switches the band (HD FM1/2/3, HD AM). Tunes in a station. Switches the Seek mode.
o When 1 to 6 buttons appear, you can recall the stations from memory. For memory of broadcasting stations, see (see page 34) or (see page 34). ; Seek Mode Indicator Displaying the HD Radio Menu screen a Selects options from various function menus. s Returns to the HD Radio Control screen. You can select menu options using various functions. • For HD Radio function details, see the Instruction Manual of HD Radio tuner (optional accessory).
Seek Mode Manual Memory Sets a station selection. Stores the current receiving station in memory. 1 Select a station you wish to store in memory SEEK HD FM If SEEK is not shown, touch N e x t . The mode is switched each time you touch the button. 2 Store in memory 2sec. AUTO1 Tunes in a station with good reception automatically. AUTO2 Tunes in stations in memory one after another. MANU Switches to the next channel manually.
HD Radio Control Receive Mode Title Display The digital or analog program is selected and received. An information about the received song is displayed. 1 1 Call the HD Radio Menu Me n u 2 Me n u 2 Call the Receive mode Menu Receive Mode Display the Title screen Title Title screen HD RADIO 3 Receie Mode 2 1 AU TO Call the HD Radio Menu 2 HR RADIO 3 1 Title: 2 2 1 Switches the Receive mode. 2 Receive mode Display. 3 Returns to the HD Radio Menu.
DAB Tuner control Various control screens appear in the DAB Tuner source mode. (with the optional accessory DAB tuner connected only) Displaying the Easy Control Panel 1 2 3 4 5 6 The DAB Tuner Control Panel is displayed in a floating position of the selected picture. Displaying the Easy Control Panel Adjusts the volume. Switches the source. Switches the band (to DAB1/2/3). Selects a service. Selects the Ensemble. Switches the Seek mode.
Displaying the DAB Tuner Menu screen s Selects options from various function menus. d Returns to the DAB Tuner Control screen. You can select menu options using various functions. Me n u • For DAB Tuner function details, see the Instruction Manual of DAB Tuner (optional accessory).
Seek Mode Service Preset Memory Sets a station selection. The current receiving service is stored in memory. 1 Select a service you wish to store in memory SEEK Band If SEEK is not shown, touch N e x t . The mode is switched each time you touch the button. Service + 2 Store in memory 2sec. AUTO1 Tunes in a station with good reception automatically. AUTO2 Tunes in stations in memory one after another. MANU Switches to the next channel manually.
DAB Tuner control Service Select Language Filter The service list of the currently receiving ensemble is displayed for your selection. The languages are list for your selection. 1 1 Call the DAB Tuner Menu Call the DAB Tuner Menu Me n u Me n u 2 2 Call the Language Filter Menu Call the Service Select Menu Languag e Filter Ser vice Select DAB 3 DAB 3 Ser vice Name 1 Language Ser vice Name 1 English 1 2 Ser vice Name 2 SRCH Ser vice Name 2 220.094 Ser vice Name 1 Selects a service.
Search for Program Type 3 Select a program type The services are received when you set its program type. 1 Call the DAB Tuner Menu Select a Language 1. Display the Language select screen Me n u 2 LANG Call the PTY Search Menu PTY Search DAB PTY News DAB 1 Language 4 1 1 English PTY News 1 2 SRCH 220.094 2 SRCH LANG 1 Selects a Language. 2 Searches for the program type. 3 Returns to the PTY Search Menu. 220.094 1 Selects a program type. 2 Searches for the program type.
DAB Tuner control DAB Information DAB Announcement The DAB information is displayed. When the Announcement you have turned on starts, any source is switched to the Announcement automatically. 1 Call the DAB Tuner Menu When the announcement starts... Me n u The Announcement screen appears automatically. 2 Display the DAB Information screen Announcement screen 1 DAB 3 1 DAB DAB Information 13:50 1 Service Label: 2 Ensemble Label: Traffic News 1 2 1 Component Lable: 220.
Weather Band Tuner Control Various control screens appear in the Weather Band Tuner source mode. (with the optional accessory Weather Band Tuner connected only) Displaying the Easy Control Panel The Weather Band Tuner Control Panel is displayed in a floating position of the selected picture. 1 Adjusts the volume. 2 Switches the source. 3 Tunes in a station. Displaying the Easy Control Panel • For system key operations, see (see page 8).
Character Entry How To Use the Character Entry screen When you select the Set Disc Name mode or others, the following screen appears for character entry. Character Entry screen 1 2 2 KENWOOD 4 a b c d e f g h i j k l m n 5 o p q r s t u 5 v w x y z Space 3 1 1 1 6 Ok 1 Adjusts the volume. 2 Shifts the cursor. 3 Enters a space. If you erase a character, locate the cursor on it and touch this button. 4 Enters characters.
Source Select The source you wish to listen to can be selected quickly. Displaying the Control screen • The Source Select screen can be displayed from the control screen of any source. Press this key several times unit the Control screen appears. Control screen TUNER 13:50 TI FM AM Next CRSC FM 1 SEEK AME Preset 1 DISP SCRL – 98.1 MHz AUTO1 Displaying the Source Select screen 1 Adjusts the volume. 2 Select the source. 3 Returns to the Control screen previously displayed.
Adjusting the Monitor Display Position and Quality You can adjust the position and picture quality of the monitor. Displaying the Screen Control screen You can adjust the picture quality using the following keys. Screen Control screen 1 1 2 2 3 3 4 4 5 5 Au t o D I M 7 7 6 8 1 Brightness Control Disabled if the Auto Dimmer is On. 2 Tint Control Displayed for an NTSC system image on TV or Video. 3 Color Control Displayed on the TV/Video screen only.
Setup Menu Setup Menu You can set up various receiver parameters. Displaying the Control screen • You can call the same Setup Menu for the Control screen of each source. Press this key several times until the Control screen appears. Control screen TUNER 13:50 TI FM AM Next CRSC FM 1 SEEK AME Preset 1 DISP SCRL – 98.1 MHz AUTO1 Displaying the Setup Menu screen Setup Menu screen 1 1 2 3 4 5 3 1 3 Adjusts the volume. Scrolls the Setup Menu. Calls each Setup Menu.
Audio Set Up You can setup a speaker network, etc. Displaying the Audio Set Up screen Speaker setup screen 1 1 4 3 7 2 5 6 1 6 1 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (see page 62) 4 Calls the Setup Menu. 5 Displays the X'Over setup screen. (see page 48) 6 Sets up the front speaker type to fine-tune for the optimal equalizer curves.
Crossover Network Setup You can set a crossover frequency of speakers. (Page 47 5) X'Over setup screen X'Over HPF Front FREQ 220Hz HPF Rear FREQ 2 180Hz LPF SUB FREQ 3 120Hz 1 4 SUB Phase Normal 5 Re t u r n 1 Sets a Front High Pass Filter frequency. You can select any of the following frequency. Through, 40, 60, 80, 100, 120, 150, 180, 220 Hz 2 Sets a Rear High Pass Filter frequency. You can select any of the following frequency.
Before Use Setup Menu English | 49
System Setup You can set up the system parameters. Displaying the System Set Up 1 screen System Set Up 1 screen 1 1 4 3 Beep 5 On 5 Of f S c ro l l 2 Auto Remote Sensor 7 On System Set Up 1 1 6 7 Of f 8 1 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (see page 62) 4 Calls the Setup Menu. 5 Turns the key touch tone On or Off. ( On) 6 Allows scrolling of text display on the Source Control screen.
Setup Menu Displaying the System Set Up 2 screen 9 Selects an illumination color of receiver keys. ( Red) "Green": Green "Red": Red p Displays the System Set Up 1 screen.
Control during DVD Video or Video CD Playback AV Interface You can set audio and visual (AV) interface parameters. Displaying the AV I/F 1 screen 1 2 3 4 AV I/F 1 screen 1 1 3 2 4 4 5 5 6 Off 7 7 8 1 1 Adjusts the volume. Calls the Sound Effects Menu. (see page 62) Calls the Setup Menu. Selects a navigation system connection. ( RGB) "RGB": Allows the Kenwood’s Navigation System to connect via its interface cable.
Before Use Setup Menu Displaying the AV I/F 2 screen AV I/F 2 screen 9 On 10 11 11 AV- I N 1 13 12 Displaying the AV I/F 3 screen AV I/F 3 screen F-Left 15 16 Navigation Sou r c e 14 15 16 17 18 9 Sets a method to switch to the rear view camera video display. ( Off) "On": Switches to the the rear view camera video display when engaging the shift knob of car to "Reverse".
Control during DVD Video or Video CD Playback User Interface You can set up user interface (IF) parameters. Displaying the User I/F 1 screen User I/F 1 screen 1 1 4 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (see page 62) 4 Calls the Setup Menu. 5 Switches the wall paper. 6 Displays the User I/F 2 screen. 3 2 Wa l l 5 5 • If is not shown, touch or to display it.
Before Use Setup Menu Touch Panel Adjustment Clock You can adjust the touch panel operations. You can adjust the clock time. 1 1 Display the Touch Panel Adjust screen Display the Clock screen Touch If Touch touch Clock is not shown, to display it. or 1 If Clock touch 1 4 3 Me n u Touch Adjust 1 1 4 5 is not shown, to display it. or 6 7 3 Set 5 11:25 6 7 8 2 2 RDS SYNC To u c h 1 Of f 9 1 1 Adjusts the volume. 2 Returns to the Control screen of the previous source.
Before Use Security Code Setup 2 You can set a security code to protect your receiver system against theft. Start the security code registration Set P a s s Wo r d • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note, the Security Code can be set as the 4 digit number of your choice.
Before Use Setup Menu If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code 0 — 9 You must enter the same security code as that you have entered in Step 3 above. 2 Enter the security code Enter Now, you can use your Receiver.
Before Use 1 Recalls the memorized settings. 2 Memorizes the current Audio Set Up and AV Interface settings. 3 Clears the currently memorized settings. 4 Returns to Set Up Memory screen. Set Up Memory Audio Set Up and AV Interface settings can be memorized. The memorized settings can be recalled at any time. For example, even when the settings are cleared due to replacement of the battery, the settings can be restored.
Before Use Setup Menu SIRIUS Setup You can display the SIRIUS ID. (with the optional accessory SIRIUS Tuner connected only) Displaying the SIRIUS Set Up screen SIRIUS Set Up SIRIUS Set Up screen 1 1 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (see page 62) 4 Calls the Setup Menu. 5 Displays the SIRIUS ID 4 3 Me n u SIRIUS ID 123456789012 5 • If SIRIUS Set Up or 2 is not shown, touch to display it.
Control during DVD Video or Video CD Playback DAB Set Up You can set the DAB reception.(only with the optional accessory DAB Tuner connected) Displaying the DAB Set Up screen DAB Set Up DAB Set Up screen 1 5 4 1 DAB Priority Off Me n u 2 6 DRC 7 3 Regional INT Off Off PTY Watch 8 PTY Watch Off Announcement Select 8 Set 9 DAB Set Up 1 1 1 Adjusts the volume. 2 Calls the Sound Effects Menu. (see page 62) 3 Returns to the Control screen of the previous source. 4 Calls the Setup Menu.
Setup Menu Announcement Selection You can set various announcement reception parameters. 1 Displays the Announcement Selection screen Set (page 60 9) 1 1 Announcement Tr a f f i c N e w s Off Tr a n s p o r t N e w s Off 3 Wa r n i n g Off 3 News Off 2 4 Re t u r n 1 1 1 Adjusts the volume. 2 Turns the Announcement Reception function On or Off. 3 Scrolls the Announcement items. 4 Returns to the DAB Set Up screen. 2 Set the announcement parameters Tr a f f i c N e w s etc.
Before Effects Sound Use Menu Sound Effects Menu You can set up the receiver sound effects. Displaying the Control screen • You can display the same Sound Effects Menu on the Control screen of any source. Control screen TUNER 13:50 TI FM AM Next CRSC FM 1 SEEK AME Preset 1 DISP SCRL – 98.
Before Use Audio Control You can adjust the front/ rear and right/ left audio balance. Displaying the Audio Control 1 screen Audio Control 1 screen 1 1 6 4 5 3 5 2 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu. (see page 46) 4 Calls the Sound Effects Menu. 5 Adjusts the right and left volume balance. 6 Adjusts the front and rear volume balance. 7 Adjusts the volume of the present source based on the difference level of original volume.
Control during DVD Video or Video CD Playback Equalizer You can set up the equalizer. Displaying the Equalizer screen Equalizer screen 1 1 4 3 2 7 Me n u To n e System Q 5 5 Natural 6 System Q-EX On Equalizer 1 64 | 1 English 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu. (see page 46) 4 Calls the Sound Effects Menu. 5 Selects an equalizer curve type. You can select any of the following equalizer curves.
Before Use Sound Effects Menu Tone curve setup 4 You can set a Tone curve. 1 Set a level Level Display the Tone setup screen 5 Set a Q factor To n e Q Factor Tone setup screen 1 1 You can set it up only when Bass or Middle is adjusted. 2 3 6 Close the Tone setup screen 4 6 5 Ba s s DC E X T 7 1 1 1 Adjusts the volume. 2 Bass adjustment items are displayed. 3 Middle adjustment items are displayed. 4 Treble adjustment items are displayed.
Sound Effects Menu Zone Control You can set the front and rear audio source. Displaying the Zone Control screen Zone Control screen 1 1 4 5 7 3 2 Normal 8 6 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu. (see page 46) 4 Calls the Sound Effects Menu. 5 Turns the Zone Function (that sets different source sounds for front and rear speakers) On or Off. 6 Sets the front and rear audio source separately.
English | 67
Troubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn on. ✔ The fuse has blown. After checking for short circuits in the wires, replace the fuse with one having the same rating. ✔ The speaker wire has a short-circuit or touches the chassis of the vehicle, and then the protection function is activated.
? No sound can be heard, or the volume is low. ✔ Attenuator is turned on. Turn off Attenuator. ✔ The fader or balance settings are set all the way to one side. Reset the fader and/or balance settings. ✔ The input/output wires or wiring harness are connected incorrectly. Reconnect the input/output wires or the wiring harness correctly. See the section on . ? The sound quality is poor or distorted. ✔ One of the speaker wires is being pinched by a screw in the car.
Specifications Specifications subject to change without notice. Monitor section Picture size : 6.95 inches wide 154.1(W)×87.1(H)mm Display system : Transparent TN LCD panel Drive system : TFT active matrix system Number of pixels : 336,960 (480H×234V×RGB) Effective pixels : 99.99% Pixel arrangement : RGB striped arrangement Back lighting : Cold Cathode Fluorescent Tube FM Tuner section Frequency range (200kHz) : 87.9~107.9MHz Usable sensitivity (S/N=30dB) : 9.3dBf (0.
FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.