COMPACT Hi-Fi COMPONENT SYSTEM M-616DV INSTRUCTION MANUAL © B60-5870-08/00 (E, X) LVT2249-001A M616DV_12th.indd 1 11.7.
Before applying power ¤ Caution : Read this page carefully to ensure safe operation. Units are designed for operation as follows. Australia ........................................................... AC 240 V only Europe .............................................................. AC 230 V only Safety precautions WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
5. Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
Before use Contents Caution : Read the pages marked ¤ carefully to ensure safe operation. Before applying power...................................2 Safety precautions ......................................................................2 IMPORTANT SAFETY INSTRUCTIONS ............2 Before use .......................................................4 Connections ....................................................6 Disc information .............................................8 Handling discs...............
How to read this manual Most of the functions are designed to be able to operate from the remote control unit. Changing the battery of the remote control unit Use a commercially available button battery (CR2025). CR2025 (+side) Preparing the remote control unit When you use the remote control unit for the first time, pull out the insulation sheet. Operation When the power cord is plugged in, STANDBY/TIMER indicator is lit.
Connections FM indoor antenna ANTENNA FM75 Right speaker Left speaker Component Video cord (commercially available) COMPONENT VIDEO OUT To TV with video input terminal Y The "DIGITAL OUT" terminal of this unit puts out only the digital audio of the DVD/CD source. Cb DIGITAL OUT R L AUDIO OUT (COAXIAL) Cr VIDEO OUT ANTENNA FM75 Power cord To AV receiver/amplifier or speaker with built-in amplifier etc.
Connecting the FM antenna To remove Dock adapter 1 Connect the lead to the [ANTENNA FM 75Ω] terminal. 2 Find the location that gives the best reception. 3 Secure the antenna as high up as possible. • Insert a thin object such as the tip of a flat-blade screwdriver into the slit on the dock adapter and lift it to remove. • The antenna supplied with the system is a basic antenna for indoor use. For stable signal reception, the use of an outdoor antenna (commercially available) is recommended.
Disc information Types of Playable Discs The system this unit is using does not only play music from CD but can also play the discs listed below to offer you high-quality entertainment of video of movies and live concerts. DVD VIDEO (DVD-R/RW, DVD+R/RW) Playable Disc CD (CD-R, CD-RW) VCD (SVCD*) Logo mark on disc Disc size Played sides Contents Video + Audio 8 cm 12 cm 8 cm 12 cm 8 cm 12 cm One or both One or both One side only One side only One side only One side only Approx. 41 min.
Operation regulatory marks With this unit, some functions such as the play function may be restricted depending on the location where the DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual. " " • Contact the sales agent as to whether your USB device conforms to the USB mass storage class specs. • Using an unsupported USB device can result in abnormal playback or display of the audio file.
About MP3 and WMA The playable MP3/WMA file (hereafter called Audio file) and the media format have the following limitation. The Audio file, which is not conforming to the specification, may not play normally. Playable Audio file Playable DVD±R/RW format • UDF-Bridge Playable CD-R/RW format • ISO 9660 Level 1/2 • Joliet Playable MP3 file Playable file system of USB device • File formats: MPEG 1/2 Audio Layer 3 file • Extension: .
About Video file About Picture file Acceptable video files Acceptable picture files Playable MPEG1, MPEG2 file Playable JPEG file • • • • • • • • • File formats: JPEG • Extension: .jpg, .jpeg • Baseline format: Up to a maximum of 8192(W) × 7680(H) pixels • Progressive format: — • File size: Max. 4 M bytes File formats: MPEG 1/2 Extension: .mpg, .mpeg, .m1v, .m2v, .dat, .vob, .mod, .
Component names and functions 15 1 14 2 15 3 4 16 5 17 6 7 8 18 19 9 20 10 21 11 22 12 13 23 1 14 13 12 2 11 10 9 8 3 4 5 1 1 2 10 3 4 8 button 5 6 7 MULTI CONTROL 5/∞/2/3 buttons To switch the system on or to standby mode. To select a setting item. STANDBY/TIMER indicator 5/∞ buttons Red lighting: Ordinary standby mode Orange lighting: Timer standby mode To tune to higher/lower radio frequency or search radio stations for TUNER.
6 4/¢ buttons To search forward/backward to next/previous title/ chapter/track for DVD. To search forward/backward or to skip to the next/ previous files for audio files and iPod, iPhone. To tune to preset radio stations for TUNER. To skip to the next/previous group/folder for DVD and audio files (with pressing SHIFT button). 7 FADE MUTING button 8 REPEAT button 21 digit buttons 0 – 9 To select a track/file number for CD and audio file. To select a preset radio station for TUNER.
Basic function Switching the system on Adjusting the sound Press or INPUT SELECTOR button. STANDBY/TIMER indicator will go out. The system will switch to the last selected source. You can reinforce or weaken the bass and treble levels suitable for your favorite music. To adjust the bass and treble levels Switching the system to standby mode Press button. STANDBY/TIMER indicator is lit.
Using the DVD/USB device Preparation Inserting a USB device Inserting a disc 1 Press 1 Press 0 button to open the disc tray. 2 2 Insert a USB device to the USB connector on the front panel. Place a disc onto the disc tray with the label side facing up. button to select standby mode. Removing the USB device 3 Press 0 button to close the disc tray. Removing a disc 1 Press 0 button and carefully pull the disc out. 2 Press 0 button to close the disc tray.
Using the DVD/USB device Playing a DVD/Video CD DVD disc menu For Remote control unit: Press CD/DVD 6 button to start playback. Operation type To view the title menu To view the DVD menu To select a menu item For Main unit: Press INPUT SELECTOR button to select "DVD", and press 6 button. The title/chapter number and elapsed playing time of the current chapter appear on the display. Operation Press TOP MENU button to display the disc's title menu, if available.
⁄ • For audio file, video file; "T:xxx" appears on the display. "T:xxx" indicates the file number. • The digit buttons, 0–9 on the remote control unit, can also be used to select a track/file. Press the digit buttons as shown below: CD Audio/video file To select track/file 2 2 and ENTER 2 and ENTER To select track/file 23 2, 3 and ENTER 2, 3 and ENTER To select file 120 — 1, 2 and 0 If ENTER button is not pressed, the search for the selected track/file will start in 5 seconds.
Using the DVD/USB device Programming chapters/tracks/files To clear the program Programming chapters/tracks/files of a DVD/audio file/video file is possible when playback is stopped. Up to 32 tracks/files for a disc and USB device can be stored in the memory in any order. Press FM MODE/PLAY MODE button. The icon "PROG." disappears from the display. 1 2 3 4 5 In stop mode, press FM MODE/PLAY MODE button repeatedly to enter program setting. "P01 0000" appears on the display.
⁄ Changing the display information • *1 All tracks/files are repeated continuously. A-B Repeat You can play back a desired section repeatedly. 1 2 Press A-B button to select the starting point (A) in play mode. Press A-B button to select the ending point (B) in play mode. ⁄ To change information on the on-screen bar Press ON SCREEN button. Every time the button is pressed, the display changes in the following order: For DVD : Information The current title elapsed time.
DVD Setup Selecting the scanning mode Setting a menu Press to select the video output suitable for the TV. 1 Press SHIFT and SET UP buttons together. 2 Press MULTI CONTROL 2 or 3 button to select the menu. Press SHIFT and PROGRESSIVE buttons together. Display Setting Component video "576I" 720 x 576i ✔ "576P" 720 x 576p ✔ Scanning mode 576I Select this when connecting the TV which does not support the progressive scanning.
Menu Item TV SYSTEM Contents You can select the TV system (PAL, NTSC or AUTO). SCREEN SAVER You can set the screen saver function (ON or OFF). If no operation is done for about 3 minutes, starts the screen saver. VIDEO You can select the VIDEO system (INTERLACE or P-SCAN YPBPR). TV TYPE 4:3 PS (Pan Scan conversion): Select when a standard 4:3 TV is connected. Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit.
Using the iPod/iPhone Inserting an iPod/iPhone Repeat play Connect an iPod/iPhone to the iPod dock. You can play the current song or the all songs repeatedly. Playing an iPod/iPhone For Remote control unit: Press iPod/iPhone 6 button. For Main unit: Press INPUT SELECTOR button to select "iPod", and press 6 button. Press REPEAT button. Each press switches the selection of iPod/iPhone play mode. Random play You can play all the album in random order.
Using the AUX Using the radio Playing an external component Tuning in radio stations An external component can be connected to AUX IN of this unit and played back. 1 For Remote control unit: Press TUNER/AUX to select "TUNER." For Main unit: Press INPUT SELECTOR button to select "TUNER." 2 For Remote control unit: Press and hold MULTI CONTROL 5 or ∞ button to tune in to the desired frequency. For Main unit: Press and hold TUNING 5 or ∞ button to tune in to the desired frequency.
Using the radio Manual preset Using Radio Data System (Europe only) You can store up to 20 radio stations in the memory. When a preset radio stations selected, the preset number appears on the display. Radio Data System is a system that transmits useful information (in the form of digital data) for FM broadcasts along with the broadcast signal.
Tuning by Program Type (PTY search) (Europe only) This function lets you set the tuner to automatically search for stations which are currently broadcasting the type of program (genre) you want to listen to. 1 For Remote control unit: Press TUNER/AUX to select "TUNER." For Main unit: Press INPUT SELECTOR button to select "TUNER." 2 Press PTY SEARCH button. If the current station is with Radio Data System, the program type of the station is displayed.
Clock/timer operation Clock setting Timer setting 1 Press CLOCK/TIMER button. "SETCLOCK" appears and "CLOCK" starts flashing. The system can switch on to DVD, USB, TUNER or iPod automatically at a preset time, serving as an alarm to wake you up. 2 Press ENTER button. The hour indication starts flashing. Important! 3 Press 4 or ¢ button to set the hours and press ENTER button. The minute indication starts flashing. 4 Before setting the timer, ensure that the clock is set correctly.
9 Press ¢ or 4 button to select the play mode and press ENTER button. Play mode PLAY AI PLAY Function The playback begins at the level set with VOLUME. The volume is increased gradually until the level set with VOLUME. The timer is now set. 10 Press button to turn the power off. STANDBY/TIMER indicator also lights in orange. Sleep timer setting If the sleep timer is activated, the system will switch to standby mode after the selected time has expired. Press SLEEP/APS button.
System setup In case of difficulty Setting Auto Power Save (A.P.S.) Resetting the Microcomputer A.P.S. stands for Auto Power Save, which is the function that switches this unit OFF when it has not been controlled for more than 30 minutes while its power is ON and the disc and other inputs are in stop mode. The microcomputer may malfunction (the unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor.
DVD player operation Remote control unit “NO DISC” is displayed. Does not function properly. \ Insert a disc correctly (label side up). \ Clean the disc. \ Use a new or readable disc. \ Wait until the moisture condensation at the lens has cleared. NO picture. \ Replace the batteries. \ Remove the obstacles. \ Move closer to the system when using the remote control unit and make sure that you are pointing at unit’s remote sensor. "ON SCREEN" is displayed on main unit.
General information Specifications Maintenance Main unit Cleaning the cabinet Amplifier section • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, ammonia or abrasive. Rated output power ..............................20 W + 20 W (1 kHz, 10% T.H.D., at 6 Ω) AUX IN (Sensitivity/Impedance) ....................... 125 mV/47 kΩ Audio Output AUDIO OUT .................................................................. 0.
Speakers Enclosure ..................................................................... Bass-reflex type Speaker ................................................................... Full-range: 89 mm Impedance .............................................................................................6 Ω Maximum input ............................................................................... 20 W Dimensions .........................................................................
Declaration of Conformity with regard to the EMC Directive 2004/108/EC • Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan • EU Representative's: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands • • Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) c
