Operation Manual

21
STATUS MESSAGE (TYPES I AND II ONLY)
You can send and receive Status messages which may be
decided in your talk group. Messages can contain up to 16
alphanumeric characters.
A maximum of 15 received messages can be stored in the
stack memory of your transceiver.
■ Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as [Status] to enter Status
mode (proceed to step 5) or [Selcall + Status] to enter
Selcall mode (proceed to step 3).
3 Press
the <B or C> key to select the station you want to
call.
• In Selcall List Mode, press and hold the S or key for 1
second to enter Manual Input mode. Press the <B or C>
key to select the digit you want to change, then rotate the
Selector to change the Code Up or Down. Or, you can
enter the Code directly by using the keypad.
4 Press the S or key to enter Status mode.
5 Press
the <B or C> key to select the status you want to
transmit.
• In Status List Mode, press and hold the S or key for 1
second to enter Manual Input mode. Press the <B or C>
key to select the digit you want to change, then rotate the
Selector to change the Code Up or Down. Or, you can
enter the Code directly by using the keypad.
6 Press the key programmed as [Call 1] to [Call 6] to
initiate the call.
■ Receiving
A calling ID or text message will appear when a Status call
is received. Press any key to return to normal operation.