Operation Manual

12
MENU MODE
Many functions on this transceiver are selected or confi gured through
the Menu instead of physical controls. Once you become familiar with
the Menu system, you will appreciate the versatility it off ers.
MENU ACCESS
1 Press the key programmed as [Menu].
• The category list is shown.
• When there is only 1 category, the function list is
shown (proceed to step 4).
2 Press / to select a category item.
• You can enter a category number directly.
3 Press or to view the function list.
4 Press / to select a function item.
• You can enter a function number directly.
5 Press or to set up the selected function item.
• Press or to return to the category list.
6 Press / to select your desired setting.
• For settings with more than 1 level, repeat steps 5 and 6.
7 Press or to set the selected setting and exit Menu
mode.
• Press or at any time to return to the previous display.
• Press
at any time to exit Menu mode.
MENU CONFIGURATION
Some transceiver keys may already be programmed with
functions listed in the Menu. Those functions can be accessed
directly by pressing the key. All other functions can still be
accessed using the transceiver Menu. The following table lists
the available Menu items.
Display Description
AUTO DIAL Autodial Mode
AUTO DIAL PROG Autodial Programming mode
BROADCAST Broadcast ON/OFF
DIRECT CH1 SEL Direct CH/GID 1 ~ 5 Select