Operation Manual

19
■ Receiving
A calling ID or text message will appear when a Status call is
received. Press any key to return to normal operation.
■
Reviewing Messages in the Stack Memory
1 Press the key programmed as [ Stack ] , or press and hold
the key programmed as
[ Selcall ] , [SDM], [Status+SDM],
[ Status ] , or [ Selcall + Status ] to enter Stack mode.
• The last received message is displayed.
2 Press / to select the desired message.
• Message types are identifi ed as follows:
I: Caller ID, S: Status Message, M: Short Message
• Press and hold
for 1 second or press to cycle the
display information as follows:
ID Name > Status/Short Message > CH/GID > Time Stamp
3 Press to return to normal operation.
• To delete the selected message, press or . To
confi rm the deletion, press or .
• To delete all messages, press and hold
or for
1 second. To confi rm the deletion, press or .
SHORT/LONG MESSAGES
Received short messages are displayed the same as Status
messages and are stored in the same stack memory.
To send short messages, and to send and receive long
messages, you must connect the transceiver to a PC. Ask your
dealer for details.
GPS REPORT
To send your location data. GPS data can be manually
transmitted by pressing the key programmed as
[ Send the GPS
data
] , or by accessing the Menu {Page12}. If set up by your
dealer, GPS data may be automatically transmitted at a preset
time interval.