Operation Manual

21
A maximum of 15 received messages can be stored in the stack
memory of your transceiver.
■ Transmitting
1 Select your desired zone and channel.
2 Press the key programmed as [Status] to enter Status
mode (proceed to step 5) or [Selcall + Status] to enter
Selcall mode (proceed to step 3).
3 Press
/ to select the station you want to call.
• You can enter a station ID by using the Keypad, or by using
/ .
4 Press to enter Status mode.
5 Press / to select the status you want to transmit.
• You can enter a status ID by using the Keypad, or by using
/ (refer to step 3, above).
6 Press the key programmed as [Call 1] to [Call 6] to
initiate the call.
■ Receiving
A calling ID or text message will appear when a Status call is
received. Press any key to return to normal operation.
■ Reviewing Messages in the Stack Memory
1
Press the key programmed as [ Stack ] to enter Stack mode.
• The last received message is displayed.
2 Press / to select the desired message.
• Press and hold for 1 second or press to cycle the
display information as follows:
Selcall Name > Status Name > CH/GID
3 Press to return to normal operation.
• To delete the selected message, press or . To
confi rm the deletion, press or .
• To delete all messages, press and hold
or for
1 second. To confi rm the deletion, press or .