Operation Manual

INSTALLING THE CAP OVER THE UNIVERSAL

CONNECTOR <NX-3200/ NX-3300>

If you are not using an optional

speaker/ microphone or headset,

install the cap over the universal

connector.

Secure the cap in place using the

dressing screw.

INSTALLING THE (OPTIONAL) SPEAKER/ MICROPHONE

OR HEADSET <NX-3200/ NX-3300>

Insert the guide of the speaker/ microphone or headset

connector into the groove of the universal connector.

Secure the connector in place using the attached screw.

Optional speaker/

microphone

Note:

●

When not using an optional speaker/ microphone or headset, install

the cap over the universal connector.

●

The noise canceling function on KMC-54WD Speaker Microphone

works using the built-in DSP of the transceiver, and can be used only

with the NX-3000 series Portable models.

Universal

connector cap