Operation Manual

BASIC OPERATIONS

SWITCHING POWER ON/ OFF

Turn the Power switch/ Volume control clockwise to switch the

transceiver power ON.

Turn the Power switch/ Volume control counterclockwise to

switch the transceiver power OFF.

ADJUSTING THE VOLUME

Rotate the Power switch/ Volume control to adjust the volume.

SELECTING A ZONE AND CHANNEL

Select the desired zone using the Selector, 4-way D-pad or

the buttons programmed as [Zone Up]/ [Zone Down]. Each

zone contains a group of channels.

Select the desired channel using the Selector, 4-way D-

pad or the buttons programmed as [Channel Up]/ [Channel

Down]. Each channel is programmed with settings for

transmitting and receiving.

●

The default setting for the Selector is [Channel Select].

●

The transceiver may have names programmed for zones and

channels. The zone name and channel name can contain up to 12

and 14 characters respectively. While selecting a zone, the zone

name will appear above the channel name.

●

If programmed by your dealer, your transceiver will announce the

zone and channel numbers as you change them.