Operation Manual

PREPARATION
INSTALLING/ REMOVING THE (OPTIONAL) BATTERY
PACK
CAUTION
●
Do not short the battery terminals or dispose of the battery by fire.
●
Never attempt to remove the casing from the battery pack.
●
Install the battery pack after cleaning the battery pack contacts and
the transceiver terminals.
●
Before charging a battery pack that is attached to the transceiver,
ensure that the safety catch is firmly closed.
.
●
If the release latch is tilted and the battery
pack is not attached to the transceiver,
return the release latch to its original
position using your finger.
Release latch
1
Match the guides of the battery pack with the corresponding
grooves on the upper rear of the transceiver, then firmly press
the battery pack to lock it in place.
2
Lock the safety catch to prevent accidentally pressing the
release latch and removing the battery pack.
3
To remove the battery pack, lift the safety catch, press the
release latch, then pull the battery pack away from the
transceiver.
2
1
3
Release latch
Safety catch
12