Operation Manual

Function
Menu
Display
PF Key
Menu
Analog
Conv.
NXDN
Conv.
P25
Conv.
LTR
Trunking
NXDN
Trunking
P25
Trunking
TX Auto Gain
Control
TX AGC N/A
p p p p p p p
Vibrator Vibrator
p p p p p p p p
VOX VOX Level
p p p p p
N/A N/A N/A
VOX Function VOX
p p p p p
N/A N/A N/A
Zeroize Zeroize
p p p p p p p p
Zone Delete/ Add Zone Del/ Add
p p p p p p
N/A N/A
Zone Down -
p
N/A
p p p p p p
Zone Select *7 -
p
N/A
p p p p p p
Zone Up -
p
N/A
p p p p p p
*1
Channel Select can be programmed only on the Selector knob.
*2
Emergency can be programmed only on the Auxiliary (orange) key and the optional speaker/
microphone PF 1 (orange) key.
*3
Group, Group + Short Message, Group + Status, Individual, Individual + Short Message and
Individual + Status function as Selcall in Fleetsync systems.
*4
In P25 Conventional systems, Group + Short Message and Group + Status function in the same
manner as Group. Sending of short messages and status messages is not supported.
*5
In P25 Conventional and P25 Trunking systems, Individual + Short Message and Individual + Status
function in the same manner as Individual. Sending of short messages and status messages is not
supported.
*6
Keyset and Rekey Request can be used when set as P25 OTAR.
*7
Zone Select can be programmed only on the Selector knob and the Lever switch.
19