Operation Manual

o
Low Transmit Power <Low>
Turns Low Transmit Power on or off. When using a channel programmed with
medium or high power, this allows you to change the output power to low.
o
Maintenance <Maint>
Allows you to display the signal strength and site information on the LCD when
constructing the system or during maintenance.
o
Medium Transmit Power
Turns Medium Transmit Power on or off. When using a channel programmed with
low or high power, this allows you to change the output power to medium.
o
Menu <Menu>
Press this key to select and perform functions using the transceiver Menu.
o
Mic Sense
Allows you to change the microphone sensitivity.
o
Microphone Type
Allows you to select a microphone type that suits the optional external microphone
connected.
o
Monitor <Moni>
Allows you to turn the transceiver signaling off, to listen to all calls that are received
on the channel.
o
Monitor Momentary <Moni>
Press and hold this key to momentarily turn the transceiver signaling off. Releasing
this key turns the transceiver signaling back on. While signaling is off, you can listen
to all calls that are received on the channel.
o
Operator Selectable Tone <OST>
Refer to “Operator Selectable Tone (OST)” {p. 40} .
o
OST Down <OST->
Press this key to decrease the Operator Selectable Tone number of your selected
channel.
o
OST List
Allows you to enter OST List mode.
o
OST Up <OST+>
Press this key to increase the Operator Selectable Tone number of your selected
channel.
o
Playback <Play>
Refer to “Playback” {p. 66} .
26