Operation Manual

o
Priority-channel Select <OSP>
Allows you to set a channel as a priority channel.
o
Radio Check
Allows you to check whether the transceiver can be communicated or not.
o
Radio Inhibit
Allows you to inhibit the transceiver operation by remote control.
o
Radio Uninhibit
Allows you to uninhibit the transceiver operation by remote control.
o
Regroup Request <Regrp>
Allows you to send a request to the dispatcher to join the talkgroup set up by the
dispatcher. The channel name for the dynamic regroup channel appears on the
display when the transceiver joins the talkgroup.
o
Rekey Request <Rekey>
Allows you to make a request to update the Encryption key.
o
RX Audio Equalizer (High)
Allows you to set the audio response for high frequencies.
o
RX Audio Equalizer (High Midrange)
Allows you to set the audio response for high midrange frequencies.
o
RX Audio Equalizer (Midrange)
Allows you to set the audio response for midrange frequencies.
o
RX Audio Equalizer (Low Midrange)
Allows you to set the audio response for low midrange frequencies.
o
RX Audio Equalizer (Low)
Allows you to set the audio response for low frequencies.
o
RX Auto Gain Control
Allows you to set the transceiver to automatically adjust the volume of the receiving
sound to a specific level for easy listening.
o
Scan <Scan>
Refer to “SCAN” {p. 31} .
o
Scan Delete/ Add <D/A>
Allows you to include or omit each channel in the scan sequence.
o
Scan Normal <ScnNrm>
Allows you to forcibly perform a non-priority scan even when priority scan has been
set.
27