Operation Manual

Bluetooth
If your transceiver has been programmed with the Bluetooth function, you can
connect your transceiver with a Bluetooth headset to make hands-free calls.
The Bluetooth specifications are as follows.
Version : Version 3.0
Power class : Class 2 (2.5 mW, up to 10 m)
Profile : Headset Profile (HSP)
Device class : Phone
Note:
●
The communication distance varies depending on the obstacles between the
communication devices and the radio wave conditions.
●
Only headsets which support the Headset Profile (HSP) certified by Bluetooth SIG can be
used with the transceiver. However, operations are not guaranteed in all headsets.
If the Bluetooth Serial Port Profile is enabled by your dealer, you can make a wireless
connection between your transceiver and the Bluetooth-enabled device such as a
PC using the Serial Port Profile. With the Serial Port Profile, you can connect your
transceiver to a PC without using a programming cable to communicate with the Field
Programming Unit (FPU) or to use the PC Interface Protocol.
For details on the Field Programming Unit (FPU) or PC Interface Protocol, consult
your dealer.
TURNING Bluetooth ON/ OFF
Press the key programmed as [Bluetooth] to turn the Bluetooth function on or off.
Alternatively, press the key programmed as [Menu] to enter Bluetooth Mode using
the Menu Mode.
Press the [J] and [K] keys to select “On” or “Off”.
Press the [
] or [ ] key to confirm your selection.
●
“ ” appears on the display when the Bluetooth function is turned on. If a Bluetooth device
is already connected to your transceiver, “ ” appears on the display.
54