Operation Manual

o
Pairing Bluetooth devices
1
Press the [J] and [K] keys to select the device to connect to.
In this case, select the headset device.
2
Press the [
] or [ ] key to connect.
3
Press the [
] or [ ] key to start pairing.
Alternatively, you can pressed the key programmed as [Bluetooth Connect/
Disconnect].
●
The LED indicator blinks in blue.
●
For Bluetooth devices that does not support Simple Secure Pairing, you need to enter
a Personal Identification Number (PIN) code. You need to operate the Bluetooth
headset to proceed with pairing.
When pairing is complete, your transceiver will connect to the Bluetooth headset. When
the connection is established, you can perform hands-free call.
●
The “ ” indicator appears on the display.
Note:
●
Once the headset has been paired, it can be used automatically with the transceiver the
next time the transceiver and headset are powered on. If the headset cannot be used
automatically, connect manually using the My Device setting in the Bluetooth menu of the
transceiver.
(Some headset models cannot be used automatically.)
●
Up to 10 Bluetooth devices can be registered to your transceiver.
●
The pressing of the key programmed as Bluetooth Connect/ Disconnect does not affect
the status of the Bluetooth connection via Serial Port Profile.
56