Operation Manual

3
REPLACING THE PF NAME PLATE
YoucanrecongurethePFnameplatesat
anytime.
1 RemovethecurrentPFnameplatefrom
thefunctionkeyusingane-tippedtool.
2 PunchoutthePFnameplatecard,and
inserttheplateontotherelativefunction
key.
Nameplate
Squeezeandinsert
theplate
INSTALLING THE microSD MEMORY CARD
1 OpentheCap.
2 InsertthemicroSDmemorycard.
• InsertthemicroSDmemorycardwithits
terminalsidefacingthesamesideasthe
frontofthepanel.
• InsertthemicroSDmemorycarduntilit
clicksintoplace.
• ToremovethemicroSDmemorycard,
pushthecardinwardsonce,thenpullitout
straight.
Cap
microSD
memorycard
Note:
◆ microSDmemorycards(Class2orhigher)andmicroSDHCmemorycards(Class2orhigher)
canbeused.
◆ SDXCmemorycardscannotbeused.
◆ ThistransceiverisnotguaranteedtooperatewithallmicroSDmemorycards.
(Operationsareconrmedonmemorycardsforthefollowingbrands:SanDisk,TOSHIBAand
Panasonic.)
◆ UsethemicroSDmemorycardwithintheallowableoperatingtemperature.
◆ DonotremovethemicroSDmemorycardorturnoffthistransceiverwhilethemicroSDmemory
cardisbeingaccessed.
◆ ThewaterproofperformanceisnotguaranteedifthemicroSDmemorycardslotcapisnottinto
place.
◆ MakesureyourhandsarecleanbeforeopeningthemicroSDmemorycardslotcap.
Compensation Disclaimer
DatastoredonthemicroSDmemorycardmaybealteredorlostduetoproblemswiththis
transceiver.WedonotacceptliabilityinrespectofthedatastoredonyourmicroSDmemorycard,
failuretosavethedataproperly,lossofdata,andanydirectorindirectdamages.