Operation Manual

5
PROGRAMMABLE FUNCTIONS
The , , , , , S, A, <B, C>, and ■ keys can be programmed with the functions
listed below. Ask your dealer for details on these functions.
• None
• 2-tone
1, 10
• Auto Telephone
2
• Autodial
• Autodial Programming
• AUX A
• AUX B
• Broadcast
3
• Call 1 ~ 6
• CH/GID Down
• CH/GID Recall
• CH/GID Up
• Channel Entry
• CW Message
4
• Direct CH/GID 1 ~ 5
• Display Format
• Emergency
5
• External Speaker
• Fixed Volume
• Forced Search
3
• Function
• GPS Position Display
• Group ID/Channel Entry
• Group
6
• Group + Short Message
6
• Group + Status
6
• Home CH/GID
• Horn Alert
• Individual
6
• Individual + Short Message
6
• Individual + Status
6
• LCD Brightness
• Lone Worker
• Maintenance
• Monitor
7
• Monitor Momentary
7
• Operator Selectable Tone
1
• Priority-channel Select
8
• Public Address
• Scan
• Scan Delete/Add
• Scrambler/ Encryption
• Scrambler/ Encryption Code
• Selcall
9
• Selcall + Short Message
9
• Selcall + Status
9
• Send the GPS data
• Short Message
• Site Down
3
• Site Lock
3
• Site Up
3
• Squelch Level
1
• Squelch Off
1
• Squelch Off Momentary
1
• Stack
• Status
• Talk Around
7
• Telephone Disconnect
2
• Transceiver Password
• Volume Down
• Volume Up
• Zone Delete/Add
• Zone Down
• Zone Up
1
Available only for Analog Conventional operation.
2
Available only for Analog Trunking operation.
3
Available only for NXDN Trunking operation.
4
Available only for NXDN Conventional operation.
5
Emergency can be programmed only on the key. When assigned, the dealer must set
the key assignment hold to “Enable” and second function as “Emergency”.
6
Available only for NXDN Conventional operation and NXDN Trunking operation.
7
Available only for Analog Conventional, Analog Trunking, and NXDN Conventional
operation.
8
Available only for Analog Conventional and NXDN Conventional operation.
9
Available only for Analog Conventional and Analog Trunking operation.
10
Available only for NX-720H/ NX-720HG/ NX-820H/ NX-820HG.