KEN WOOD UNIVERSAL REMOTE CONTROL RC-R0905 INSTRUCTION MANUAL KEN WOOD CORPORATION " About this remote control . ..
W 8 Thank you for purchasing the RC-R0S05 universal remote control unit from KEN WOOD. This remote control unit is an optional unit designed for use with KEN WOOD audio video receivers 1090VR and 1060VR. For customers with the 1080VR, you can use this remote control specifically for ROOM B, allowing you to leave separate remote controls in each room. See the instruction manual supplied with your 1090VR for details.
& The remote contort supplied with this receiver is also capable of controlling components from a variety of manufacturers once . you register the appropriate setup codes int the cremate control unit. i Refer to “Remote aeration of other components” for details about the operations available for aah component. eds for WG audio compo: S 10 INQUIRE proper system control opy ENCODE compactness Rivers, LD play bed below orangeade (o this uni by systems 2 8098, MD. 9000 with system oo ol cogs.
BOSS fEn; Enter the setup code. Press POWER, and check to see that the component you want to control turns on. B Press the ENT key ta store the code you have just input. The back light flashes twice. ROOM B Ll Repeat steps 3 to 6 for all components you want ta control. B Hold down the ENT key until the back light fishes twice.
Operating other components This operation lets you aerate the registers components. KEN WOOD audio components with system control turn on and off automatically connections. © Use the VIDEO, AUDIO, or TV keys to select the component you desire.
i OO {0 This operation fetch you change the remote contra operation mode without changing the input selector. You may find this useful when you want to control one component while using another. (For example, if you want to rewind the tape deck while listening to a €D.) This operation is also useful if you don’t know the which mode the remote control is set to. Executing this operation allows you to change or reconfirm the operation mode you desire.
e %" The macro play function allows you to set the remote to 4l controversial component sin succession. After completing this setup, you can perform a series of operations automatically. Enter the setup codes for the components you want to control beforehand. peroration Preparing for automatic operations (MACRO play) n Make a plan of the macro play you want to set up.
s B Select where the macro should be stored. Press the VIDEO, AUDIO, or TV key to select the macro location. (MACRO, 2, and 3 respectively) Audi D O DIVED O Press the keys to be operated in order. EXAMPLE: © Press TV > SHIFT > POWER 10 turn on the TV v SHIFT Press FUNCTION SHIFT > ; to set the TV to the i appropriate video input TV/SAT A0 S ES FUNCTION i s G Press VIDEO twice to select the LD player registered at VIDEO 2. DIVED @ Crass SHIFT and POWER to turn on the LD player. ..
Executing an automatic operation_ Press the MACRO key. E Execute the macro play. Press the VIDEO, AUDIO, or TV key ta execute the corresponding macro play. f‘ Audio VIDEO O v Yen [ ARCADES 1En) Keys o cortisol used m this operation step 2 within 3 seconds.
If you make connections ta another room, you can use the remote control to select source components and to adjust the volume etc) output to the other room. SRR ARCADES fEr) Keys ar cont; used i this operation Select a speaker system. 5 SPEAKERS B E Set the remote control to the ROOM B operation mode. Press the FUNCTION SHIFT key and then press the ENT [ROOM B) key within 3 seconds. ROOM B FUNCTION 20 6 E Select the desired component.
Future Set allows you to update the remote control so it can operate new components which do not appear in the setup aced list at the end of the manual, or all of the following command positions: VIDEO, VIDEO, VIDEOS, VIDEO, TV1, TVZ, CABLE, CD, TAPPED.
E Hold your remote to the speaker portion of your telephone. supply & setup code pumper Your put configuration. this amber suture reh Code selection after mode download Rater such a5 €. the ramble Contra completion of the downloads. spat § al automatically enters a special set-up mode which works iow. n Select the component for which you want to register the information downloaded above.
Setup code correlation _ Deleting a setup code (7@ Hold down the ENT key until the back light flashes twice. | | @ Select the component to be deleted. Tress the VIDEO. AUDIO, or TV key repeatedly to select the I desired component © Enter the 3 digit code "991". O Hold down the ENT key until the back light flashes twice. Checking a setup code © Hood down the ENT key until the back light stashes twice.
Non-IR codes CD player 8900 Satellite 2900 DvD 6900 Cassette deck 7900 v 1900 0SS 3900 LD player 5900 vCR 4900 MD 8900 Phonon 0900 VCR Set up codes Maker Set up codes Maker Set up codes Maker Set up codes Acton 4042 Harmonization 3038 R 4000, 4081 Haywood 4072 Jake 4047 HOM 4072 Aida 4000, 4081, 4104 Forequarter 4046 Akz 4000 HI-C 2047 Akt A7 Dinar 4072, 4240 e hectometer 4037 Hitachi 4000, 4041, 4042, Amazonian mgr Electronics 4037 4240 2032 Hyperion 3072 4000, 4002, 4037, percale 4900 4043, 2121, 4184, in
TV Setup codes Maker Set up codes Maker Set up codes Maker Set up codes Admiral 1003 GE 1021, 1027, 1047 NEC 1019 1030, 1056 Adventure 1046 1051, 1055 UNESCO 1179 ko 1092 1178 1262 Olenek 1030, 1082, 1178 Asi 1020 1186 Nosh 1078 T : 1617, 1019, 1030 e o7 ambassador Gold star 1019 1;33 6] g0 Admiral e — Opus m Gran: I Catatonic Ana Alienate Grundy 11791180 Orin AOC Hallmark 178 Panasonic Aud Harvard 180 Penny HCM 1262 1184 Hiram 117 Fiscal 1082 Yacc 1086, 1145, 1151 Hyperion 9. 1030, 1039 infinity Jared 9.
TV Set up codes (continued) Satellite Set up daces Maker Set up codes Maker Set up codes Maker Set up codes Sinuosity 1177 Gatun 1085 1177 Sony 1000 Technicians 1051, 125C Universal 027 Undersign 1178, 7179, 1180 Technical Ace 173 Vector Research 1030 £ 7 matchwood 1051, 1066 Victor 2, 1250 Tektite 1016 1019, 1039 Didrikson 1054 1054.
ARCADES Er) Cable Set up codes Maker Set up codes, [Maker Set up codes Maker Set up codes ABC 0003. 0007 [vise 5011 Scientific At 0008, 0017, 0477 11, 0013 — o o 8517" 0013 [ 5007 Sinai 895, 0020 .
2 bATdéEIMr»Sér;; codes Cassette deck Set up codes Maker Set up codes Maker Set up codes Maker Set up codes Carve 7158 7158 Sony 7083 Deon 7037 7158 i Grudging 7158 Set up codes Maker Set up codes Set up codes 1197 T Weekend 7027 Arcs ‘Yamaha 7094, 7087 7220 MD Set up codes Maker Set up codes Woodworker 305 Sara 3450 Misc.
hollowing for the type of cremate control operations available for each component. tho de for each component must be entered beforehand. p Refer t0 The setup 5 or TV keys ta select the component — * When pressing keys in Succession. tress aah key seemly and e sure it at slats 1 se: you want to control. * Num: 1 e as 2115 keys o the longing | ding to the operations you desire.
TV operations O SOD OO ODD @@ =0 EASES SOD > + (Chennai +} » i {Mute) Numeric keys FUNCTION SHIFT commands ~ [Channel -} B {Volume +] {Input selector} " {Voicemail -} ALY AUDIO {Alternate audio) VCR operations RS2 OOE decor Play) Numeric keys FUNCTION SHIFT commands (G5 menu) ‘1 BODHISATTVA (input selector) LD player operations {050 menu) L Y > Numeric keys FUNCTION SHIFT commands 15} INF {Tetrameter) REPEAT (Repeat) RANDOM {Random} DISPLAY (Display) | Satellite tuner operations OOO (05D menu) 254 oo > cham
anthem weeded below. Refer DSS receiver operations ) D 2SS ODE OOD (CH Guise) [CRETE] [l + (Charmaine +) Numeric keys FUNCTION SHIFT commands MENU (Peru} THEME (Theme) FAV.
TV operations Numeric keys OO o FUNCTION SHIFT commands (input Gy m (Voluble -} ALT AUDIO (Eternal: VCR operations e TS, CoD OO ¥ OGS ROOD Rerecord Piaf] Numeric keys FUNCTION SHIFT commands (OSD menu) ) # (Pa (input defector} Fas LD player operations * OOE O _J PROCEED O 1055 mem) Numeric keys FUNCTION SHIFT commands INF (Framer) ) DISPLAY {Display} Satellite tuner operations (08D menu) (Sect Numeric keys FUNCTION SHIFT commands input selector) » {3} ALT AUDIO {Alternate audio) (4=} +100 {«100) wi