Box contents Safety precautions Unpack your KPA-H2C kit carefully and make sure that everything listed here is present: 1 x Cradle 1 x Base 1 x Antenna 1 x Cassette adapter Warning Take the following precautions to prevent traffic accidents and avoid personal injury: • Installation must be performed according to this installation manual. Kenwood is not responsible for issues arising from installations not performed according to the procedures in this manual.
Installation in a vehicle Installation in a vehicle (continued) Note: Do not put Here2Anywhere in the docking station until you have completed the installation. 1. Determine where you want to mount 2. The leaves on the base can be bent to conform to curved mounting surfaces. Here2Anywhere. • Do not install Here2Anywhere where it may obstruct your view through the windshield or your view of your vehicle’s indicator displays.
Installation in a vehicle: Mounting the antenna 1. Temporarily plug the antenna into the “1-Sat/Terr (Main) connector on the back of the cradle until it is firmly seated, as shown. 6 Installation in a vehicle: Routing the cable Note: If you’re using the Kenwood CX-SR10 SIRIUS antenna, you’ll need to remove the plastic housings from the antenna connectors—we recommend labeling the wires with their respective colors. (See pg. 9, figure 16 of the CX-SR10 Installation Manual for details).