User manual

KEY ASSIGNMENT MODE

This transceiver allows you to reprogram the Side 1 and

Side 2 keys with any of the functions listed in the table below.

Explanations on the use of each function are provided under

“PROGRAMMABLE FUNCTIONS” {p.22}.

Table

Number

Function Name Digital Analog

0 None (no function)

✓✓

1 Calling Alert

✓✓

2 Key Lock

✓✓

3 Monitor

✓✓

4 Monitor Momentary

✓✓

5 Scan/ Scan Temporary Delete*

✓✓

6 Scrambler N/A

✓

7 Squelch Off N/A

✓

Squelch Off Momentary

(Side 2 key default)

N/A

✓

9 Zone (Side 1 key default)

✓✓

✓

: Available

N/A: Not Available

*1 :

Press and hold the Side 1 or Side 2 key for 2 seconds will

activate the Scan Temporary Delete function.

To change the functions of the Side 1 and Side 2 keys:

1 With the transceiver power OFF, press and hold the Side 1

and Side 2 keys while turning the transceiver power ON.

• Continue to hold the Side 1 and Side 2 keys until the LED

lights orange and the transceiver announces “Setup”.