Operation Manual

2
PREPARATION
INSTALLING/ REMOVING THE BATTERY PACK
◆
Do not short the battery terminals or dispose of the battery by fire.
◆
 Neverattempttoremovethecasingfromthebatterypack.
◆
Install the battery pack after cleaning the battery pack contacts
and the transceiver terminals.
1 Alignthebatterypackwiththeback
of the transceiver, then press the
battery pack and transceiver firmly
together until the release latch on
the base of the transceiver locks.
2 Toremovethebatterypack,liftthe
safety catch on the base of the
transceiver, then press the release
latch underneath the safety catch.
3 While pressing the release latch,
pull the battery pack away from the
transceiver.