Operation Manual

6
INSTALLING THE OPTIONAL SPEAKER/ MICROPHONE
(OR HEADSET)
Note:
◆ Thetransceiverisnotfullywaterresistantwhenusingaspeaker/
microphone or headset.
1 Insertthespeaker/microphone(or
headset)plugsintothespeaker/
microphonejacksofthetransceiver.
2 Placethelockingbracketoverthe
speaker/microphone(orheadset)
plugs so that the locking tabs insert
into the transceiver grooves.
• Pushdownonthelockingbracketto
slide it into place.
3 While holding the locking bracket in
place, push it towards the bottom of
the transceiver until the tabs on the
bracket click into place.
• Toremovethelockingbracket,push
the bracket up from the base.