Operation Manual

7
SWITCHING THE AUDIO OUTPUT
It is necessary to switch the audio output if you listen only
throughtheearphone(φ2.5).
1 SwitchthetransceiverpowerOFF.
2 PressandholdthePTT switch and Side 2 key while turning
thetransceiverpowerON.
3 Continue to hold the PTT switch and Side 2 key until a
beep sounds.
• Repeatsteps1to3toswitchtheaudiooutput.
• Whentheaudiooutputisswitchedtoearphone,youwillhear
thebeepfromtheearphone;andabeepwillsoundfromthe
speakerwhentheaudiooutputisswitchedtobuilt-inspeaker.