Operation Manual

10
BASIC OPERATIONS
1 TurnthePower switch/ Volume control
clockwise to switch the transceiver power
ON.
• Abeepwillsounds.
2 Pressthekeyprogrammedwiththe
[Monitor] or [Squelch Off](Side 2 key
default) function to hear background noise,
then rotate the Power switch/ Volume
controltoadjustthevolume.
3 RotatetheSelector to select your desired
channel.
• Whenyoureceiveanappropriatesignal,you
will hear audio from the speaker.
4 Tomakeacall,pressandholdthePTT
switch, then speak into the microphone
using your normal speaking voice.
• Holdthemicrophoneapproximately3to4cm
(1.5inches)fromyourlips.
5 ReleasethePTT switch to receive.
Note:
◆ When the battery pack voltage becomes too low, transmission will
stop and an alert tone will sound.