Operation Manual

13
ZONE SELECTION
Tochangetheoperatingzone:
1 WiththetransceiverpowerOFF,pressandholdthePTT
switch and Side 1 key while turning the transceiver power
ON.
• ContinuetoholdthePTT switch and Side 1keyuntiltheLED
lightsorangeandthetransceiverannounces“Self”.
2 ReleasethePTT switch and Side 1 key.
• ThetransceiverannouncesZonenumber(1or2).
3 PresstheSide 1 or Side 2keytoselectthezonenumber.
• Avoiceannouncementwillinformyouofthecurrentlyselected
zonenumber.
4 PressthePTTswitchtosetthezonenumber.
• Abeepwillsound.
• Avoiceannouncementwillinformyouofthecurrentlyselected
zonetype(Digital/Analog).
5 PresstheSide 1 or Side 2keytoselectthezonetype.
• Avoiceannouncementwillinformyouofthecurrentlyselected
zonetype.
• Proceedtothenextstepifyouarenotchangingthezonetype.
6 PressthePTT switch to save the setting.
• Abeepwillsoundifthereisnochangeinthezonetype.The
transceiverwillmovetotheFrequencySettingandannounces
“Channel”.
• Ifthezonetypeischanged,thetransceiverannounces
“Conrm”.
7 PressthePTT switch and Side 1 key.
• Allchannelfrequencies,CommonIDandQT/DQTvaluesin
theselectedzonewillberestoredtothedefaultvalue.
• ThetransceiverwillmovetotheFrequencySetting.
Note:
◆ Thetransceiverwillautomaticallyreturntonormaloperationifno
actionisperformedfor5seconds.