Operation Manual

14
CHANNEL OPERATING FREQUENCIES
Tochangetheoperatingfrequencyofachannel:
1 FollowtheoperatingstepsinZoneSelectiontoselectthe
zone.
2 RotatetheSelector to your desired channel.
• ThetransceiverannouncesChannelnumber.
3 PressandreleasethePTT switch.
• AbeepwillsoundandthetransceiverannouncesTable
number.
4 PresstheSide 1 or Side 2keytoincrement/decrementthe
Tablenumber,toselectthenewchannelfrequency.
• Tablenumbersandtheircorrespondingoperatingfrequencies
are provided in the table {page15}.
• Avoiceannouncementwillinformyouofthecurrentlyselected
Tablenumber.
5 PressthePTT switch to save the setting.
• Abeepwillsound.
• Repeatsteps2to5tosetupanotherchannel.
6 TurnthetransceiverpowerOFFandthenONagainto
activate the new settings.
Note:
◆ Thetransceiverwillautomaticallyreturntonormaloperationifno
actionisperformedfor5seconds.