Operation Manual

16
COMMON ID SETTINGS (DIGITAL)
TochangetheCommonIDsettingsofachannelofDigital:
1 FollowtheoperatingstepsinZoneSelectiontoselectthe
zonetype(digital).
2 RotatetheSelector to your desired channel.
• ThetransceiverannouncesChannelnumber.
3 PresstheSide 1 or Side 2 key to select Common ID setup.
• Thetransceiverannounces“ID”and“Channel”alternatelywith
each press of the Side 1 or Side 2 key.
4 PressandreleasethePTT switch.
• AbeepwillsoundandthetransceiverannouncesCommonID
number(1-255).
5 PresstheSide 1 or Side 2 key to set the channel and
select the Common ID .
• ThetransceiverannouncesCommonIDnumber.
• PressandholdtheSide 1 or Side 2keytoincrement/
decrementtheCommonIDnumberby10atatime.
• Avoiceannouncementwillinformyouofthecurrentlyselected
Common ID number.
6 PressthePTT switch to save the setting.
• Abeepwillsound.
• Repeatsteps2to6tosetupanotherchannel.
7 TurnthetransceiverpowerOFFandthenONagainto
activate the new settings.
Note:
◆ Thetransceiverwillautomaticallyreturntonormaloperationifno
actionisperformedfor5seconds.