Operation Manual

17
QT/ DQT SETTINGS (ANALOG)
QuietTalk(QT)andDigitalQuietTalk(DQT)arefunctionsthat
rejectundesiredsignalsonyourchannel.Youwillhearacall
onlywhenyoureceiveasignalthatcontainsamatchingQT
toneorDQTcode.Ifacallcontainingadifferenttoneorcode
isreceived,squelchwillnotopenandyouwillnothearthecall.
Likewise,whentransmittingusingQTorDQT,thereceiving
station must have a matching tone or code to hear your call.
Beawarethatotherpartiescanstillhearyourcallsiftheyset
up their transceiver with the same tone or code.
ThedefaultQT/DQTsettingsforeachchannelareprovidedin
thetable{page18}.
TochangetheQT/DQTsettingsofachannelofAnalog:
1 FollowtheoperatingstepsinZoneSelectiontoselectthe
zonetype(analog).
2 RotatetheSelector to select the channel to change.
• ThetransceiverannouncesChannelnumber.
3 PresstheSide 1 or Side 2keytoselecttheQT/DQTsetup.
• Thetransceiverannounces“QT/DQT”and“Channel”
alternately with each press of the Side 1 or Side 2 key.
4 PressandreleasethePTT switch.
• AbeepwillsoundandthetransceiverannouncesQT/DQT
number.
5 PresstheSide 1 or Side 2keytoincrement/decrementthe
Tonenumber,toselectthenewtoneorcode.
• QT/DQTtablenumbersandtheircorrespondingtones/codes
are provided in the table {page18}.
• PressandholdtheSide 1 or Side 2keytoincrement/
decrementtheTonenumberby5atatime.
• Avoiceannouncementwillinformyouofthecurrentlyselected
Tonenumber.