Operation Manual

20
KEY ASSIGNMENT MODE
ThistransceiverallowsyoutoreprogramtheSide 1 and
Side 2 keys with any of the functions listed in the table below.
Explanationsontheuseofeachfunctionareprovidedunder
“PROGRAMMABLEFUNCTIONS”{page22}.
Table
Number
Function Name Digital Analog
0 None(nofunction)
✓ ✓
1 CallingAlert
✓ ✓
2 KeyLock
✓ ✓
3 Monitor
✓ ✓
4 MonitorMomentary
✓ ✓
5 Scan/ScanTemporaryDelete*
1
✓ ✓
6 Scrambler N/A
✓
7 SquelchOff N/A
✓
8
SquelchOffMomentary
(Side 2keydefault)
N/A
✓
9 Zone(Side 1 keydefault)
✓ ✓
✓
: Available
N/A: NotAvailable
*1:
PressandholdtheSide 1 or Side 2keyfor2secondswill
activatetheScanTemporaryDeletefunction.
TochangethefunctionsoftheSide 1 and Side 2 keys:
1 WiththetransceiverpowerOFF,pressandholdtheSide 1
and Side 2keyswhileturningthetransceiverpowerON.
• ContinuetoholdtheSide 1 and Side 2keysuntiltheLED
lightsorangeandthetransceiverannounces“Setup”.