Operation Manual

21
2 Releasethekey.
• Ifyoucontinuetoholdbothkeys,orifyoureleasebothkeys,
theoperationwillcancelin5seconds.
3 Pressandholdthekeytobereprogrammed(eitherthe
Side 1 or Side 2key).
• Thetransceiverwillannounce“Tablezero”.
4 Releasethekey.
5 PresstheSide 1 or Side 2keytoincrement/decrementthe
number, to select the new key function.
• Tablenumbersandtheircorrespondingfunctionsareprovided
in the table {page20}.
• Avoiceannouncementwillinformyouofthecurrentlyselected
Tablenumber.
6 PressthePTT switch to save the setting.
• Abeepwillsoundandthetransceiverwillannouncethenew
Tablenumber.
7 TurnthetransceiverpowerOFFandthenONagainto
activate the new settings.
Note:
◆ Thetransceiverwillautomaticallyreturntonormaloperationifno
actionisperformedfor5seconds.