Operation Manual

24
BACKGROUND OPERATIONS
TIME-OUT TIMER (TOT)
TheTime-outTimerpreventcallersfromusingachannelfor
anextendedduration.Ifyoucontinuouslytransmitforthe
durationprogrammedbyyourdealer(defaultis60seconds),
transmissionwillstopandanalerttonewillsound.Tostopthe
tone, release the PTT switch.
BATTERY SAVER
Whenactivatedbyyourdealer,theBatterySaverfunction
decreases the amount of power used after no signal is present
andnooperationsarebeingperformedfor5seconds.Whena
signalisreceivedoranoperationisperformed,BatterySaver
turns off.
Note:
◆ BatterySaverisdisabledduringacallondigitalmode.
◆ WhiletheBatterySaverisoperating,theLEDmayashgreen
whenreceivingaQT/DQTsignalwhichdoesnotmatchtheQT/
DQTtone/codesetupinyourtransceiver.
LOW BATTERY WARNING
Whileoperatingthetransceiver,theLowBatteryWarning
soundsanalerttoneevery30secondsandtheLEDindicator
blinks red when the battery needs recharged or replaced.
CHANNEL ANNUNCIATION
When changing the channel, the transceiver will announce the
newlyselectedchannelnumber.Likewise,thetransceiverwill
announce the current channel after you turn the transceiver
powerON.(ChannelAnnunciationcanbeactivatedor
deactivatedbyyourdealer.)