Operation Manual

25
VOICE OPERATED TRANSMISSION (VOX)
VOXoperationallowsyoutotransmithands-free.VOXcanonly
beusedifyouareusingasupportedheadset.ToactivateVOX
andsettheVOXGainlevel,performthefollowingsteps:
1 Connect the headset to the transceiver .
• TheVOXfunctiondoesnotactivatewhenaheadsetisnot
connected to the accessory terminal of the transceiver.
2 WiththetransceiverpowerOFF,pressandholdtheSide 1
keywhileturningthetransceiverpowerON.
3 Continue to hold the Side 1 key until a beep sounds.
• TheLEDindicatorlightsturnorange.
• WhentheSide 1 key is released, the transceiver will
announcestheVOXGainlevel.
4 PresstheSide 1keytosettheVOXGainlevel,from1
(leastsensitive)to10(mostsensitive).
• PresstheSide 2keytoenableordisabletheVOXfunction
forthecurrentchannel(youcanchangethissettingforeach
channel by selecting a channel with the Selector).Whenturned
ON,abeepsounds.WhenturnedOFF,adoublebeepsounds.
5 PressthePTT switch to save the setting.
• Abeepwillsound.
• ThetransceiverannouncesthenewVOXGainlevel.
6 TurnthetransceiverpowerOFFandthenONagainto
activateVOX.
Note:
◆ IfaheadsetisconnectedtothetransceiverwhiletheVOXfunctionis
switchedONandtheVOXGainlevelisconguredtoahigher,more
sensitive level, louder received signals may cause the transceiver to
start transmission.
◆ Thetransceiverwillautomaticallyreturntonormaloperationifno
actionisperformedfor20seconds.