Operation Manual

27
TROUBLESHOOTING GUIDE
Problem Solution
Cannot turn the
transceiverpowerON.
• Thebatterypackisdischarged.
Rechargethebatterypackor
replace the batteries.
• Thebatterypackmaynotbe
installedcorrectly.Removethe
battery pack and install again.
Batterydeterioration
occurs when a battery
pack is charged
repeatedly.
• Thebatterypacklifeisnished.
Replacethebatterypackwitha
new one.
Cannot talk to or hear
other members in your
group.
• Makesureyouareusingthe
samefrequencyandCommon
ID(Digital)/QT/DQT(Analog)
settings as the other members in
your group.
• Othergroupmembersmaybe
toofaraway.Makesureyou
are within range of the other
transceivers.
Othervoices(besides
groupmembers’)are
present on the channel.
• ChangetheCommonID(Digital)/
QT/DQT(Analog)settings.Make
sure all group members change
the settings on their transceivers
tomatchthenewCommonID/
QT/DQTsetting.
Note:
◆ Iftheproblempersists,contactaKENWOODauthorizedservice
centerforrepairs.Youmayreturnyourtransceiverforserviceto
theauthorizedKENWOODdealerfromwhomyoupurchaseditor
anyauthorizedKENWOODservicecenter.