Manual

12
SELF-PROGRAMMING FLOW
The ow of Self-Programming is as follows.
Ⓐ
Ⓑ
Ⓐ
Ⓑ
Setup Mode Selection
[Side 1] / [Side 2] : Change between setup modes.
[PTT] : Enter to selected setup mode.
[Selector] : Change channel number.
[PTT]
[Side 1] + [PTT] + Power On
Release [Side 1] + [PTT]
Select the Zone Number
[Side 1] / [Side 2]
Frequency
Setup Mode
[Side 1]
QT/DQT
Setup Mode
Analogue
Frequency
Digital
Frequency
Select the
QT/DQT table
[Side 1] /
[Side 2]
[PTT]
[PTT]
[PTT]
Select the
ID table
[Side 1] /
[Side 2]
[PTT]
[PTT]
Select the
Frequency
[Side 1] /
[Side 2]
Common ID
Setup Mode
[PTT]
[PTT]
[Side 2]
[Side 1]
[Side 2]
[Side 1]
[Side 2]
Confirmation
Setup Mode