Manual

13
ZONE SELECTION
1 With the transceiver power OFF, press and hold the PTT switch and Side 1
button while turning the transceiver power ON.
• Continue to hold the PTT switch and Side 1 button until the LED lights
yellow and the transceiver announces “Self”.
2 Release the PTT switch and Side 1 button.
• The transceiver announces “Zone 1”.
3 Press the Side 1 or Side 2 button to select a zone number.
• A voice announcement will inform you of the currently selected zone number.
4 Press the PTT switch to decide current selected zone and enter to Setup Mode
Selection.
• A voice announcement will inform you of the currently selected zone number
and channel number “Zone X” (X = 1 to 3 for zone number), “Channel X” (X =
1 to 16 for channel number).
5 Go to “FREQUENCY SETUP” {p. 14}, “QT/DQT SETUP (ANALOGUE)” {p.
16}, or “COMMON ID SETUP (DIGITAL)” {p. 18}.
Note:
◆ The transceiver will automatically return to normal operation if no action is performed for
20 seconds.