Manual

18
COMMON ID SETUP (DIGITAL)
Common ID is a signaling system designed for Digital communications. When
a channel is setup with an ID, squelch will only open when a call containing a
matching Common ID is received. If a call containing a dierent Common ID is
made on the same channel you are using, you will not hear the call. This allows you
to ignore (not hear) calls from another parties who are using the same channel.
To change the ID settings of a channel of Digital:
1 During Setup Mode Selection, rotate the Selector to select a channel number.
• The transceiver announces the zone number and channel number.
2 Press the PTT switch to set the channel number.
3 Press the Side 1 or Side 2 button to select the Common ID Setup Mode.
• The transceiver announces “ID”.
4 Press the PTT switch to enter Common ID setup mode.
• Beep A (1 beep) will sound and the transceiver announces the ID number (1
to 255).
5 Press the Side 1 or Side 2 to increment/ decrement the ID number.
• Press and hold the Side 1 or Side 2 button to increment/ decrement the ID
number by 5 at a time.
• A voice announcement will inform you of the currently selected ID number.
6 Press the PTT switch to temporary save the selected ID number.
• Beep B (2 beeps) will sound.
7 Press the Side 1 or Side 2 button to select the Confirmation Setup Mode.
• The transceiver announces “Conrm”.
8 Press the PTT switch to save the setting and return to zone selection.
• Beep B (2 beeps) will sound.
Note:
◆ The transceiver will automatically return to normal operation if no action is performed for
20 seconds.